Schecter Reaper-6 FR S guitar in Satin Charcoal Burst
In stock
- SKU
- SCHECTER1506
- Color
- Black
Description
Schecter Reaper-6 FR S Electric Guitar in Satin Charcoal Burst
The Reaper-6 FR S delivers a distinctly thin, fast neck profile paired with a lightweight, resonant body that captures immediate transient response and sustains articulate pick definition through tracking and layering sessions. The Ultra Thin 'C' neck contour and 24 X-Jumbo frets on an Ebony fingerboard create a playing surface optimized for fast tracking passes and precise single-note work, while the set-neck construction with Ultra Access ensures comfortable reach to higher registers during overdubs and complex arrangements. This is a recording-ready instrument designed for extended-range tonalities and clean, articulate single-note passages that punch through dense mixes.
Playability & Recording Response
The neck features a Maple/Walnut multi-ply core with carbon fiber reinforcement rods, delivering solid sustain and tonal stability across repeated takes without dead zones. At the first fret the neck measures 0.748" and tapers to 0.787" at the 12th fret, maintaining the ultra-thin profile throughout the playable range for consistent intonation and feel during long session work. The 14" fretboard radius balances open-string clarity for harmonic content with comfortable fretting geometry across the 25.5" scale.
Tone & Studio Electronics
The Schecter Diamond Decimator bridge pickup and Sustainiac neck pickup provide aggressive articulation paired with harmonic sustain capability for textural layering and experimental sound design. Independent controls—Master Volume, Master Tone, 3-Way Pickup Switch, 2-Way On-Off Sustainiac Switch, and 3-Way Sustainiac Mode Switch (Fundamental-Mix-Harmonic)—enable real-time tonal shaping within the session from tight rhythm tones to ambient, sustain-driven leads. The 9-volt battery compartment powers the Sustainiac system for endless sustain manipulation and feedback texturing.
Key Features
- Swamp Ash body with Burl top in Satin Charcoal Burst finish
- Set-Neck construction with Ultra Access upper-fret design
- Maple/Walnut multi-ply neck with carbon fiber reinforcement rods
- Ebony fingerboard with Pearloid Offset/Reverse Dot inlays
- 25.5" scale length with 24 X-Jumbo frets
- Ultra Thin 'C' neck contour (0.748" at 1st fret, 0.787" at 12th fret)
- Floyd Rose 1500 Series bridge and nut (1.625" width)
- Schecter Diamond Decimator bridge pickup and Sustainiac neck pickup
- Sustainiac mode selection: Fundamental, Mix, and Harmonic
- Black and Chrome hardware with Schecter tuners
- 14" fretboard radius for balanced playability
- Weight: 7.45–7.9 lbs (3.4–3.6 kg)
The Reaper-6 FR S combines luthier-grade materials, hardware precision, and specialized electronics into an instrument purpose-built for high-output, effect-driven recording and production work across modern rock, metal, and experimental genres.
More Information
| Condition | New |
|---|---|
| Dexterity | Right handed |
| Neck Construction | Set-Neck |
| Country of Manufacture | South Korea |
Reviews
This guitar ships without a case
Add the matching hard caseSchecter C-Shaped Hardcase SGR-1C
20% off with this guitar: $159.20 $199.00
It ships inside the same box — and your guitar arrives protected.
At a Glance
The Reaper-6 FR S delivers aggressive, articulate pickup voicings and harmonic sustain capabilities that sit perfectly in dense, effect-driven mixes typical of modern metal and progressive production. Its lightweight, resonant Swamp Ash body and carbon-fiber-reinforced maple/walnut neck ensure fast transients and minimal feedback noise during tracking, while the Sustainiac system and independent tone shaping controls offer studio-friendly versatility for layering textures from tight, percussive riffs to ambient, harmonic pads. The 25.5" scale and X-Jumbo frets make tracking extended-range passages and tuning stability a straightforward workflow advantage.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Extended Range
Not the best pick for
- – Jazz
- – Folk
- – Worship
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
Is this guitar suitable for drop tunings and extended-range playing?
Yes. The 25.5" scale, carbon-fiber-reinforced neck, Floyd Rose 1500 bridge, and tight low-end tone profile are engineered for low, extended-range tunings. The set-neck construction and Ebony fingerboard provide stable intonation and sustain across the 24 X-Jumbo frets.
What skill level do I need to play this guitar?
This is an intermediate to advanced and professional-level instrument. The ultra-thin 'C' neck and fast fret access suit experienced players who benefit from high-speed playability and precision; beginners may find the thin profile and extended range less forgiving.
What does the Sustainiac system do, and how do I use it?
The Sustainiac neck pickup generates endless sustain and harmonic feedback, controlled by a 2-way On-Off switch and a 3-Way Mode selector (Fundamental, Mix, or Harmonic). A 9-volt battery powers the system, allowing you to shape tones from traditional sustain to experimental feedback in real time.
What genres and playing styles is this guitar best for?
The Reaper-6 FR S excels in metal, hard rock, and progressive music. Its aggressive articulation and high sustain are optimized for tight riffs, single-note clarity, and effect-driven textures; it is not well suited to jazz, folk, or worship styles.
How does the neck feel, and what are the key measurements?
The Ultra Thin 'C' contour measures 0.748" at the first fret and tapers to 0.787" at the 12th fret, creating a fast, comfortable playing surface. The 14" fretboard radius balances open-string clarity with barre-chord comfort across the 25.5" scale.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.