EMG JMaster Active Pickup Set in Ivory
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG7760
Description
EMG JMaster Active Pickup Set in Ivory
The EMG JMaster Active Pickup Set delivers tight, articulate single-coil tone with the clarity and punch of active electronics in a format built for Jazzmaster guitars. This ivory-finished set pairs Alnico 5 magnets with wide stacked coils to cut through dense mixes while maintaining the characteristic shimmer essential for tracking and mixing Jazzmaster tones. The solderless installation kit makes retrofitting straightforward—no soldering required.
Active Electronics & Recording Tone Character
These active single-coil pickups operate on a single 9V battery with an estimated runtime of 715 hours and deliver a resonant frequency of 3.15 kHz for focused midrange presence that sits well in modern production. Output sits at 0.50V per string and 0.80V on full strum, with exceptionally clean noise performance at −120 dBV—critical for studio recording where unwanted hum and artifacts compromise takes and post-production workflow.
Studio Installation & Signal Chain Integration
The complete kit includes solderless quick-connect components that eliminate traditional wiring and reduce potential points of failure in the signal path: a master 25K volume pot, 25K tone pot, battery buss, stereo output jack, and dual pickup in/out buss ship ready to assemble. All necessary cables—pickup, connect, output, and battery—are included, along with mounting screws for a clean, professional install on any Jazzmaster.
Key Features
- Active single-coil pickups with Alnico 5 magnets and wide stacked coils
- Resonant frequency: 3.15 kHz for focused, articulate tone
- Output voltage: 0.50V per string, 0.80V on strum
- Output noise: −120 dBV for clean, hum-free operation
- Battery life: approximately 715 hours on single 9V battery (500mAh)
- DC resistance: 3.16K ohms; output impedance: 3.16 kΩ
- Solderless installation with quick-connect battery and control buss components
- Master volume and tone controls via 25K potentiometers
- Complete wiring harness included: pickup cables, connect cables, output cable, battery cable
- Format: Jazzmaster; 6-string configuration
- Stainless steel construction; ivory finish
- Maximum supply voltage: 27V DC for high-headroom applications
This set pairs tight active response with Jazzmaster versatility, capturing cleaner tone and faster transients than vintage single coils—ideal for producers seeking defined, modern recordings with minimal noise floor.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JMaster Active Pickup Set captures tight, articulate single-coil tone with the clean noise floor (−120 dBV) and fast transients that sit well in dense mixes during recording sessions. Resonant frequency peaks at 3.15 kHz for focused midrange definition, and the active circuit delivers consistent output (0.80V on full strum) with minimal artifacts—perfect for capturing transparent jazz, indie, and studio recordings. Solderless installation means quick integration into your Jazzmaster without rewiring headaches.
Who This Is For
| Best suited for | Jazz, Indie, Studio Sessions, Recording |
|---|---|
| Tonal character | Tight single-coil, articulate, focused midrange, clean, hum-free |
| Less specialized for | Metal, Hard Rock (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What genres and playing styles are these pickups best suited for?
These pickups excel in jazz, indie, and studio session work where articulate tone and clean noise performance are priorities. They are not optimized for metal or hard rock applications.
Do I need to solder these pickups into my Jazzmaster?
No—the complete kit includes solderless quick-connect components for the battery buss, control layout, and pickup wiring. All cables are included, and installation requires only mounting screws.
What is the battery life and what power supply is needed?
A single 9V battery (500mAh) powers the pickups for approximately 715 hours of operation. The maximum supply voltage is 27V DC for high-headroom applications.
How do these pickups compare to passive Jazzmaster pickups in terms of tone?
Active electronics deliver faster transients, tighter response, and exceptional noise rejection (−120 dBV) compared to passive single coils, with output at 0.80V on full strum for a punchy, cutting tone in dense mixes.
What comes in the complete kit?
The set includes the neck and bridge pickups with Alnico 5 magnets, a 25K master volume pot, 25K tone pot, solderless quick-connect battery and control buss components, stereo output jack, all necessary cables (pickup, connect, output, battery), and mounting screws.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $17 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.