EMG 57/66 Active Humbucker Pickup Set in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5550
Description
EMG 57/66 Active Humbucker Pickup Set in Red
The EMG 57/66 pairing captures tight, articulate highs and focused low-end response across the fretboard with minimal noise interference. This active humbucker set is engineered for recording applications demanding clarity and definition without sacrificing punch, whether tracking high-gain tones or layering complex chord voicings. The covered construction and Alnico V magnets produce a balanced tonal palette that translates equally well to modern and classic production styles.
Tone & Electronics
The bridge 57 pickup (2.11 kHz resonant frequency) delivers aggressive midrange articulation with 3.00V output on single notes and 4.50V when strummed, while the neck 66 pickup (1.61 kHz resonant frequency) provides warmer, more vocal response with identical output levels. Both pickups maintain -100 dB noise floor at 60 Hz, eliminating hum and buzz even in electrically noisy studio environments—a hallmark of EMG active electronics that ensures clean signal capture and reliable tracking.
Installation & Operation
The solderless Quik-Connect system eliminates traditional wiring complexity and supports four-conductor configurations for coil-splitting and series/parallel switching on compatible electronics, expanding your tonal palette during overdub sessions and mixing stages. A single 9V battery supplies both pickups with exceptional efficiency, delivering 160 microamps current draw and approximately 1500 hours of battery life per charge, while the included tone and volume controls integrate seamlessly with standard guitar electronics for straightforward studio setup.
Key Features
- Active humbucker set: 57 bridge and 66 neck pickups
- Alnico V magnet material with steel pole pieces
- Covered construction
- Bridge pickup resonant frequency: 2.11 kHz
- Neck pickup resonant frequency: 1.61 kHz
- Output voltage: 3.00V single note / 4.50V strummed on both pickups
- Noise floor: -100 dB at 60 Hz
- DC resistance: 10K
- Active electronics: 9V battery supply, 160 microamps current draw, 1500-hour battery life
- Solderless Quik-Connect system with 2-wire plus battery configuration
- Four-conductor wiring supports coil-splitting and series/parallel modes
- Long shaft potentiometer compatible; includes 2 tone and 2 volume pots
This pickup set combines the clarity and responsiveness of modern active design with the versatility of configuration options, making it a capable choice for producers and engineers prioritizing signal integrity and tonal flexibility across recording sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 57/66 set captures tight, articulate highs and controlled lows perfect for recording metal, hard rock, and progressive material with minimal noise interference. The bridge and neck pickups sit clearly in a mix with balanced output (3–4.5V depending on pick attack), supporting four-conductor switching for studio tone shaping and layering. Active electronics eliminate hum entirely, freeing you to work in any recording environment without re-amping or noise-gating workarounds.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Studio Sessions
- ✓ High-Gain Playing
Not the best pick for
- – Jazz
- – Blues
- – Acoustic Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is the difference between the bridge 57 and neck 66 pickups in this set?
The bridge 57 (2.11 kHz resonant frequency) delivers aggressive midrange articulation for tight, cutting tones, while the neck 66 (1.61 kHz resonant frequency) provides a warmer, more vocal response. Both output identical voltage (3.00V on single notes, 4.50V strummed) and share the same -100 dB noise floor, so the choice between them is tonal character rather than output.
How long does the 9V battery last, and how hard is installation?
A single 9V battery delivers approximately 1500 hours of playing time. Installation uses EMG's solderless Quik-Connect system, which eliminates traditional soldering and supports four-conductor configurations for coil-splitting or series/parallel switching on compatible electronics.
Will these pickups pick up hum or buzz in noisy electrical environments?
No. Both pickups maintain a -100 dB noise floor at 60 Hz, a defining feature of EMG active electronics, eliminating hum and buzz even in electrically noisy live venues or studios.
What genres and playing styles are these pickups best suited for?
These pickups excel in metal, hard rock, progressive, and high-gain playing where clarity and definition are priorities. They are not recommended for jazz, blues, or acoustic folk styles.
What is included in the set, and what additional gear might I need?
The set includes both pickups, a single 9V battery supply, two tone pots, two volume pots, and all Quik-Connect wiring. You will need a compatible guitar with humbucker cavities; installation is straightforward with standard guitar electronics.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $17 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.