dbx ZC2 Wall-Mounted Zone Controller
Description
dbx ZC2 Wall-Mounted Zone Controller
The dbx ZC2 is a compact wall-mounted control interface designed for seamless integration into multi-zone recording and monitoring systems. Its slim profile and intuitive front-panel layout make it an practical choice for home studios and facilities managing distributed audio environments. This controller brings responsive, hands-on management of zone-level parameters directly to the wall, enabling real-time adjustments during tracking, mixing, and monitoring sessions.
Control Interface & Connectivity
The ZC2 features a rotary volume potentiometer and push-button mute control for direct manipulation of audio levels and muting across independent zones. Two RJ-45 connectors using standard CAT5 cable handle all signal routing, with a maximum cable run rated to 1,000 feet—enabling deployment across large studios and facilities without signal degradation. Long-distance connectivity supports flexible studio layouts and remote monitoring setups.
Studio Setup & System Integration
DIP switches onboard allow straightforward device identification and configuration within multi-zone recording and monitoring chains. The ZC2 is fully compatible with dbx DriveRack 260, DriveRack 220i, and ZonePRO devices, integrating directly into established dbx audio management and processing systems for comprehensive studio control.
Key Features
- Rotary volume potentiometer for analog level control
- Push-button mute control
- Two RJ-45 connectors
- CAT5 cable connectivity with standard RJ-45 termination
- Maximum cable run up to 1,000 feet
- DIP switches for device identification and configuration
- Wall-mounted form factor
- Compatible with dbx DriveRack 260
- Compatible with dbx DriveRack 220i
- Compatible with dbx ZonePRO devices
- Package weight: 0.45 lb
- Box dimensions: 6.9 x 5.55 x 3.5 inches
The ZC2 delivers straightforward zone-level control for recording and monitoring setups that demand reliability, responsiveness, and extended cable runs across tracking rooms and mixing spaces.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | China |
Reviews
At a Glance
The dbx ZC2 is a wall-mounted control interface that brings zone-level volume and mute management to distributed recording or playback environments. It integrates seamlessly into dbx multi-zone audio systems, allowing you to adjust levels and mute zones from anywhere in your facility using standard CAT5 cabling up to 1,000 feet. Simple DIP-switch configuration and direct compatibility with DriveRack and ZonePRO gear make it a practical addition to any professional studio or broadcast facility running multi-zone playback.
Frequently Asked Questions
What systems is the ZC2 compatible with?
The ZC2 integrates directly with dbx DriveRack 260, DriveRack 220i, and ZonePRO devices. It communicates via CAT5 cabling using standard RJ-45 connectors.
How far away can I mount the ZC2 from my main audio system?
The ZC2 supports cable runs up to 1,000 feet using standard CAT5 cable, making it suitable for large facilities, multi-floor buildings, or distributed venue installations.
What controls does the ZC2 provide?
It offers a rotary volume potentiometer for analog level adjustment and a push-button mute control for direct manipulation of zone audio levels.
Do I need special cables or connectors?
No—the ZC2 uses two standard RJ-45 connectors and regular CAT5 cabling, which are widely available and easy to install in any facility.
How do I set up multiple ZC2 controllers in one system?
Onboard DIP switches allow straightforward device identification and configuration, so you can assign each controller to the correct zone in your multi-zone audio system.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.