DBXZC2V vs DBXZC8V — Compare
dbx ZC2 Wall-Mounted Zone Controller vs dbx ZC8 Wall Mounted Zone Controller
The ZC2 offers basic rotary volume and push-button mute for straightforward level control, while the ZC8 adds programmable up/down buttons and a rotary source selector for more flexible zone management. Choose the ZC2 for simple, fixed-zone setups; choose the ZC8 for installations requiring source switching and independent per-zone configuration.
No sales tax on orders shipped outside California — total cost beats national retailers that charge sales tax in nearly every state.
Specs side by side
| dbx ZC2 Wall-Mounted Zone Controller | dbx ZC8 Wall Mounted Zone Controller | |
|---|---|---|
| Price | $100.00 | $115.00 |
| Brand | DBX | DBX |
| Year | Unknown | Unknown |
| Condition | New | New |
Why choose dbx ZC2 Wall-Mounted Zone Controller
- ✓ Simpler rotary potentiometer design requires no programming
- ✓ Compatible with DriveRack 260 and 220i in addition to ZonePRO
- ✓ Straightforward mute control via dedicated push-button
- ✓ Lower cost entry point for basic multi-zone systems
Why choose dbx ZC8 Wall Mounted Zone Controller
- ✓ Programmable push-button up/down volume lets each zone configure independently
- ✓ Rotary switch enables source selection directly from the wall controller
- ✓ Clean white faceplate design for residential and commercial aesthetics
- ✓ Flexible wiring topology (series or parallel via optional ZC-BOB) up to 1000 feet
Frequently asked questions
Can both controllers run sources to different zones?
The ZC2 offers basic volume and mute; source routing is managed by the connected dbx processor. The ZC8 adds a programmable rotary switch specifically for local source selection at each zone, giving installers more flexibility in multi-source environments.
What systems are these compatible with?
The ZC2 works with dbx DriveRack 260, DriveRack 220i, and ZonePRO devices. The ZC8 is designed for dbx ZonePRO systems. Check your processor model before purchasing.
Which one is better for large venues?
Both support up to 1000-foot cable runs with CAT5. The ZC8 offers additional wiring flexibility (series or parallel configurations) and independent per-zone source switching, making it more suitable for complex multi-zone venues where different areas need different audio sources.
Do I need special cable?
Both use standard CAT5 or CAT5E. The ZC8 specifies that cable must meet 28.6 Ohm/M nominal DCR with VW-1 rating or higher; the ZC2 simply lists CAT5 compatibility. Using quality, rated cable ensures reliable operation over longer runs.