Seymour Duncan SJM-1N Vintage Neck Pickup For Jaguar
Share
Seymour Duncan SJM-1N Vintage Neck Pickup For Jaguar
In stock
- SKU
- 11301-03
Description
Seymour Duncan SJM-1N Vintage Neck Pickup For Jazzmaster
The SJM-1N is a vintage-voiced neck pickup engineered specifically for Jazzmaster instruments, delivering the articulate, woody character that defined classic offset guitar tones. This reverse wound, reverse polarity design integrates seamlessly with bridge pickups to eliminate hum while preserving the original Jazzmaster voice. Built by Seymour Duncan's experienced team, it captures the warmth and clarity of vintage instruments without the fragility of aged components.
Tone & Characteristics
The Alnico V magnet and 6.5 kΩ DC resistance produce a balanced, slightly warm output with excellent note definition across the neck. The 10.2 kHz resonant peak sits in the sweet spot for clarity without harshness, while the EQ curve (5 bass / 3 mid / 9 treble) emphasizes articulate highs and focused lows—essential for clean recording, vintage rhythm sessions, and producing mix-ready tones that sit naturally in layered arrangements.
Recording & Session Performance
Wound with single conductor cloth wire for authentic vintage response, this pickup employs reverse wound, reverse polarity (RW/RP) winding to cancel noise when paired with standard bridge pickups—critical for tracking without unwanted hum in professional sessions. The neck-position design delivers focused sustain and clarity that records with transparency, preserving harmonic detail in overdubs and making quick tonal adjustments unnecessary during mixing.
Key Features
- Magnet Type: Alnico V Rods
- DC Resistance: 6.5 kΩ (Neck)
- Resonant Peak: 10.2 kHz
- EQ Profile: 5 Bass / 3 Mid / 9 Treble
- Winding: Reverse Wound, Reverse Polarity (RW/RP)
- Cable: Single Conductor Cloth
- Position: Neck
- Vintage-voiced design for classic Jazzmaster tone
- Hum cancellation when paired with standard bridge pickup
- No cover or claw included
The SJM-1N delivers authentic vintage Jazzmaster character with modern reliability, making it the natural choice for studios and home producers seeking that era-correct offset tone without compromise.
More Information
| Condition | New |
|---|---|
| Country of Manufacture | United States |
Reviews
At a Glance
The SJM-1N is a vintage-voiced Jazzmaster neck pickup that brings articulate, woody clarity to recordings with balanced warmth and excellent note definition across the frequency spectrum. Its 10.2 kHz resonant peak and EQ curve (5 bass / 3 mid / 9 treble) sit perfectly in the mix for clean tones, surf, and indie sessions without harshness or midrange bloat. Drop it in for authentic offset guitar character that cuts through a mix while maintaining sustain and clarity on both rhythm and melodic passages.
Who This Is For
Great for
- ✓ Surf
- ✓ Indie
- ✓ Jazz
- ✓ Clean Tones
Not the best pick for
- – Metal
- – Hard Rock
- – Djent
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
Will this pickup work with any bridge pickup, or do I need a specific one?
The SJM-1N is reverse wound and reverse polarity (RW/RP) wired to cancel hum when paired with a standard (non-RW/RP) bridge pickup. It will work best with a conventional bridge pickup; pairing it with another RW/RP pickup will lose the hum-cancellation benefit.
What's included in the box?
The pickup itself comes ready to install. Note that no cover or claw is included, so you may need to source those separately depending on your Jazzmaster's hardware.
Is this pickup good for metal or hard rock?
No. The SJM-1N is voiced for clean tones, surf, indie, and jazz—genres that benefit from its articulate highs and balanced warmth. It is not designed for metal, hard rock, or high-gain styles.
How does the output compare to hotter pickups?
At 6.5 kΩ DC resistance, the SJM-1N sits in the vintage-moderate range—warm and clear rather than high-output. It prioritizes note definition and clarity over raw volume, making it ideal for players who rely on amp tone and dynamics rather than pickup aggression.
What skill level do I need to install this?
Installation requires intermediate to advanced soldering skills and knowledge of Jazzmaster electronics. If you are new to pickup swaps, consider having a tech handle the installation to ensure proper wiring and polarity.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.