Seymour Duncan SH-18n Whole Lotta Humbucker Neck Nickel Cover Pickup
Share
- Brand new in original box
- Full Seymour Duncan manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- 11102-88-Nc
Description
Seymour Duncan SH-18n Whole Lotta Humbucker Neck Nickel Cover Pickup
The SH-18n Whole Lotta Humbucker is engineered to anchor your mix with a thick, dark, and articulate character shaped by its Alnico V magnet and carefully balanced coil design. This pickup captures deep, woody tones while preserving clarity on single-note passages and chords, providing the sonic foundation for recording sessions that demand warmth without sacrificing definition in the lower-mid range.
Tone & Recording Performance
The rough cast Alnico V bar magnet and plain enamel wire configuration deliver a full-bodied response that favors the lower-mid frequencies—ideal for sitting solidly in dense mixes without getting lost. Wax potting eliminates microphonic squeal, ensuring stable, repeatable output across multiple takes and tracking sessions, even under high-gain overdubs or aggressive picking dynamics.
Wiring Flexibility & Tracking Range
The 4-conductor lead wire supports series, parallel, and split-coil wiring configurations, allowing you to voice the pickup across different circuit topologies during production. An 8.20 k DC resistance rating positions this pickup in the moderate output range—responsive enough to drive your preamp and compression chain, yet controlled enough to capture articulate, note-for-note detail on clean and crunch tones alike.
Key Features
- Type: Dual Coil Humbucker
- Position: Neck
- Impedance: 8.20 k DC Resistance
- Magnet: Alnico V Bar
- Magnet construction: Rough cast alnico 5
- Bottom plate: Nickel silver
- Wire type: Plain enamel wire
- Lead wire: 4-conductor for multiple wiring options
- Processing: Wax potted for squeal-free operation
- Manufacturing: Hand built in Santa Barbara, CA
The SH-18n is hand-crafted and built to specification in Santa Barbara, delivering the depth and sustain required for professional-grade tracking and mixing in demanding studio applications.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The SH-18n Whole Lotta Humbucker excels as a recording neck pickup for capturing thick, balanced tones in hard rock, metal, blues, and progressive sessions—its Alnico V magnet and carefully balanced coil design deliver woody low-end body without muddiness, cutting through mix-heavy arrangements with articulate sustain on both single-note and chord work. The 8.20k resistance rating sits in the sweet spot for recording: hot enough to drive preamps and tape emulation without harshness, but controlled enough to layer cleanly with other instruments. Hand-potted construction and 4-conductor wiring make it a versatile session tool that rewards tracking through multiple amp and processing chains.
Who This Is For
Great for
- ✓ Hard Rock
- ✓ Metal
- ✓ Blues
- ✓ Progressive
Not the best pick for
- – Jazz
- – Country
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What genres and playing styles is the SH-18n best suited for?
The SH-18n excels in hard rock, metal, blues, and progressive music. Its thick, dark character with articulate sustain makes it less ideal for jazz and country applications, where brighter, more articulate neck pickups are typically preferred.
Can I use different wiring configurations with this pickup?
Yes. The 4-conductor lead wire supports series, parallel, and split-coil wiring options, allowing you to customize how the pickup voices within your guitar's circuit for different tonal possibilities.
What output level should I expect, and will it work with high-gain amps?
The SH-18n rates at 8.20k DC resistance, placing it in the moderate output range—hot enough to drive overdrive and high-gain tones cleanly, but controlled enough to keep articulate clean passages defined and prevent muddiness.
What makes this pickup resistant to feedback and noise?
The pickup is wax potted to eliminate microphonic squeal, ensuring stable output and clean sustain even under heavy picking and high-gain conditions. This processing is standard across Seymour Duncan hand-built pickups.
How does the Alnico V magnet and plain enamel wire contribute to the tone?
The rough cast Alnico V bar magnet and plain enamel wire configuration create a full-bodied response that favors lower-mid frequencies, delivering the woody lows and thick character that define the SH-18n's sound without sacrificing clarity on single-note passages and chords.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.