Seymour Duncan Apollo J-Bass, 5 Str, 70 Neck Pickup
Share
- Brand new in original box
- Full Seymour Duncan manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- 11403-11
Description
Seymour Duncan Apollo J-Bass 5-String 70mm Neck Pickup
The Apollo J-Bass neck pickup captures articulate, focused character essential for recording modern jazz bass with clarity and definition. Hand-built in Santa Barbara and vacuum wax potted for squeal-free operation, this pickup combines traditional humbucking clarity with the extended range demands of five-string instruments. This design yields defined note separation and controlled low-end response across all positions, translating to clean, punchy takes with extended sustain that sits well in dense mixes.
Tone & Construction
The linear humbucking design positions two coils side-by-side under the cover, canceling hum while preserving the open, articulate midrange that tracks clearly through compression and EQ in post-production. Hand-ground Alnico 5 rod magnets paired with Forbon flatwork and vacuum wax potting ensure stable, squeal-free performance during extended recording sessions, providing reliable tracking consistency and minimal noise interference in the signal chain.
Electrical & Specifications
A DC resistance of 9.58 kΩ positions this pickup as a moderate-output design that preserves dynamics and transient detail without driving your interface, preamp, or monitoring chain into compression. The 2-conductor shielded cable and passive design integrate seamlessly into any recording rig—active or passive—without additional power requirements or impedance complications.
Key Features
- Linear humbucking design with two coils positioned side-by-side
- Hand-ground Alnico 5 rod magnets
- DC Resistance: 9.58 kΩ
- 70mm string spacing for traditional 5-string jazz bass fit
- Vacuum wax potted for squeal-free performance
- Black cover with traditional jazz bass profile
- Forbon flatwork
- 2-conductor shielded cable
- Hand-built in Santa Barbara, CA
- Passive design with no power requirements
This Seymour Duncan Apollo neck pickup delivers meticulous craftsmanship designed to handle the extended range and tonal demands of recording five-string jazz bass with clarity, separation, and professional results.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Seymour Duncan Apollo J-Bass neck pickup is a moderate-output, hand-wax-potted humbucker built to capture clean, articulate jazz bass recordings with extended five-string range. Home recordists and producers will value its controlled low-end, open midrange character, and squeal-free operation during tracking and mixing. The linear design and Alnico 5 magnets deliver dynamic note definition that sits clearly in a mix without overdriving preamps or interfaces.
Who This Is For
Great for
- ✓ Jazz
- ✓ Funk
- ✓ Studio Sessions
- ✓ Live Performance
Not the best pick for
- – Metal
- – Hard Rock
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is the string spacing, and will it fit my five-string bass?
This pickup has 70mm string spacing, designed specifically for traditional five-string jazz bass instruments. Confirm your bass accepts a 70mm neck pickup before ordering.
What output level should I expect, and how will it work with my amp?
The Apollo has a DC resistance of 9.58 kΩ, making it moderate-output and designed to preserve dynamics and note definition without overdriving preamps or amplifiers. It works with both active and passive bass circuits without requiring external power.
Will this pickup eliminate hum in my playing setup?
Yes. The linear humbucking design with two side-by-side coils and vacuum wax potting cancels hum and prevents squealing, even at high volumes in live or studio settings.
Is this pickup suitable for genres beyond jazz?
The Apollo excels in jazz, funk, and studio sessions where articulate note separation and controlled bass response are priorities. It is not voiced for metal or hard rock applications.
What's included with the pickup, and what do I need to install it?
The pickup comes with a 2-conductor shielded cable and requires no additional power. You will need bass-specific soldering skills or professional installation to integrate it into your instrument's wiring.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.