What's the difference between this and other vintage-style humbuckers?

The Antiquity Neck uses an unwaxed construction with plain enamel mag-wire and Alnico 2, preserving natural resonance and touch sensitivity that wax-potted pickups lose. Its 7.70-ohm resistance and aged nickel silver cover deliver the warm, articulate character of pre-CBS designs without the aggressive output of modern hot pickups.

Is this pickup suitable for metal or drop tunings?

No. The Antiquity Neck is voiced for blues, jazz, classic rock, and studio sessions. Its naturally compressed lows and moderate output make it ill-suited for metal, djent, or drop-tuning applications where tighter bass response and higher gain are needed.

What gauge wire and magnet does it use?

The pickup features 42AWG plain enamel mag-wire and a 2.5-inch Alnico 2 bar magnet. This combination creates the signature warm response and touch sensitivity without wax potting, allowing the coil to resonate naturally.

Will this fit my guitar, and what tools do I need?

The Antiquity Neck measures 1.494 inches wide and 2.750 inches long, with a mounting ring width of 1.756 inches and long mounting legs for standard humbucker cavities. Installation requires basic soldering skills and familiarity with guitar electronics; intermediate to professional experience is recommended.

Does the nickel cover affect the tone?

Yes. The aged nickel silver cover and the unwaxed design work together to produce the warm, articulate tone with vocal midrange and natural compression that define the Antiquity's character. Over time, the nickel develops an authentic patina that contributes to its vintage aesthetic and tonal signature.

Seymour Duncan Antiquity Humbucker Neck Nickel Cover

The Antiquity Neck captures the warm, articulate voice of vintage American humbuckers, translating that organic character directly into your recordings. Its aged nickel silver cover and Alnico 2 magnet produce naturally compressed lows and vocal midrange without excessive output, making it an excellent choice for balanced neck-position tone across mix-friendly session work.

Tone & Output

With a DC resistance of 7.70 ohms, this neck pickup sits perfectly in the mix, delivering balanced dynamics and clarity without fighting other instruments. The 2.5-inch Alnico 2 bar magnet and 42AWG plain enamel mag-wire configuration create the signature warm response and touch sensitivity characteristic of pre-CBS era designs, while the absence of wax potting preserves natural resonance for transparent session recording.

Design & Materials

Built with aged nickel silver cover and poles that develop authentic patina over time, this pickup features custom machined metal spacers and maple spacers for precise coil damping and focused articulation. The nickel silver bottom plate with long mounting legs and single conductor push-back braided lead wire ensure reliable installation and clean shielding for noise-free tracking across studio guitar electronics.

Key Features

DC Resistance: 7.70 ohms (neck configuration)
Magnet: 2.5-inch Alnico 2 bar magnet
Wire Gauge: 42AWG plain enamel mag-wire
Cover: Aged nickel silver
Width: 1.494 inches
Length: 2.750 inches
Max Height with Leg: 1.095 inches
Mounting Ring Width: 1.756 inches
Bottom Plate: Nickel silver with long mounting legs
Spacers: Custom machined metal spacer and maple spacer
Lead Wire: Single conductor push-back braided
Not wax potted for natural resonance

The Antiquity Neck combines measured output, vintage-correct materials, and meticulous construction to deliver the articulation and warmth that defined golden-era electric guitar tone—essential tools for producing recordings with authentic character and mix clarity.

Condition	New
Country of Manufacture	United States