What makes this pickup different from standard P-bass pickups?

The Antiquity 2 Pride is hand-fabricated with sand-cast Alnico 5 magnets, hand-wound plain enamel wire, and hand-ground magnets, then potted in lamp black paraffin wax. This traditional construction yields organic harmonic complexity and long-term stability that mass-produced pickups cannot match, and the passive design requires no batteries or active electronics.

Is this pickup suitable for slap bass and extreme styles?

The Antiquity 2 Pride is voiced for rock, soul, funk, and studio sessions and is not recommended for extreme metal or slap bass extremes. Its warm, slightly compressed character and controlled highs work best in styles that benefit from articulation and mids-focused tone rather than extreme aggression or treble definition.

What are the pickup specifications and does it include a cover and plate?

The pickup has a DC resistance of 10.56K ohms, inductance of 6.50 henries, and dimensions of 2.142 inch length by 1.003 inch width by 0.435 inch height. It includes a brass bottom plate integral to the tonal character, and a pickup cover is provided with dimensions of 2.221 inch length by 1.088 inch width by 0.550 inch height.

How does the raised magnet pattern affect the tone?

The raised top and bottom magnet pattern combined with south/north polarity configuration produces punchy mids and controlled highs, creating a balanced response that sits well in a mix. This design helps prevent muddiness while maintaining the warm, full-bodied character the hand-cast magnets provide.

Will this pickup work with my current bass electronics?

Yes—the Antiquity 2 Pride is a passive design that requires no batteries or active circuitry, so it will work as a drop-in replacement in any standard P-bass wiring setup. The included brass bottom plate and traditional potting ensure compatibility and stability.

Seymour Duncan Antiquity 2 Pride Pickup For P-Bass

The Antiquity II Pride is a hand-crafted P-bass pickup engineered to deliver the warm, articulate tone of vintage instruments without compromise. Built using traditional construction methods—sand-cast Alnico 5 magnets, hand-wound plain enamel wire, and forbon bobbins—this pickup captures the character of classic bass tones while maintaining modern reliability and consistency. The Pride voicing is specifically voiced to balance aggression and warmth, translating across rock, soul, and studio tracking with equal effectiveness.

Tone & Electronics

With a DC resistance of 10.56K ohms and inductance of 6.50 henries, the Antiquity II Pride produces a full-bodied, slightly compressed response that locks into a mix with minimal EQ intervention. The raised magnet pattern and south/north polarity configuration yield punchy mids and controlled highs, while the hand-ground magnets ensure organic harmonic complexity that digital modeling cannot replicate. This is a passive design—no batteries or active circuitry required, simplifying signal chain management in recording sessions.

Construction & Materials

Hand-fabricated construction sets the Antiquity II apart: sand-cast magnets are ground by hand, bobbins are precision-wound with plain enamel wire, and the entire assembly is lacquered and potted in lamp black paraffin wax for stability and hum rejection. The included brass bottom plate is integral to the pickup's tonal character, providing mechanical support and contributing to the overall resonance of the instrument. Waxed cloth pushback wire and traditional potting methods ensure this pickup will deliver consistent tracking results across countless sessions.

Key Features

Hand-fabricated forbon bobbins and sand-cast Alnico 5 magnets
DC resistance: 10.56K ohms
Inductance: 6.50 henries with Q rating of 2.43
Raised top and bottom magnet pattern with south/north polarity
Plain enamel magnet wire hand-wound construction
Lacquered and potted in lamp black paraffin wax
Waxed cloth pushback wire for durability
Brass bottom plate included
Passive design—no battery or active electronics required
Pickup dimensions: 2.142" L × 1.003" W × 0.435" H
Pickup cover dimensions: 2.221" L × 1.088" W × 0.550" H

The Seymour Duncan Antiquity II Pride delivers authentic vintage character through uncompromising hand-crafted design, making it the choice for recording engineers and producers capturing bass tones that sit naturally in the mix and age well across multiple projects.

Condition	New
Country of Manufacture	United States