Martin VC-Dot 1 LED String 2m Long
Description
Martin VC-Dot 1 LED String 2m Long
The VC-Dot 1 is a lightweight, individually controllable LED string engineered for seamless integration into studio lighting rigs, set designs, overhead installations, and architectural structures. Each dot delivers calibrated RGB color mixing with bright, consistent output across the entire string, enabling straightforward mapping of video content and custom lighting effects without complex setup overhead. The 2-meter lead-in configuration arrives ready for immediate deployment in both controlled studio environments and permanent installations.
Optical Performance & Light Output
Each VC-Dot 1 features a single RGB LED with a 127° × 127° viewing angle (expanding to 180° × 180° when fitted with the diffuser dome), calibrated to deliver 2 cd luminous intensity and balanced color output of 1.5 lm red, 3.6 lm green, and 0.4 lm blue. Peak power consumption reaches 0.95 W per dot at full intensity and white, allowing efficient operation across large string deployments and extended session work.
Customization & Control Infrastructure
Pixel pitch is fully customizable from a standard 100 mm spacing up to 1000 mm maximum, enabling you to adapt dot density to any creative vision or studio constraint. Control integrates seamlessly with the Martin P3 System Controller and DMX512, with intuitive mapping and addressing that eliminates tedious configuration—the string also accepts RDM/DMX for flexible lighting-only applications that adapt to your production workflow.
Key Features
- Single RGB LED per dot with 127° × 127° viewing angle (180° × 180° with dome)
- Calibrated luminous intensity of 2 cd (RGB total); 1.5 lm red, 3.6 lm green, 0.4 lm blue output
- Pixel dimensions: 28 × 23 × 11 mm (without dome); 28 × 23 × 20 mm (with dome)
- Customizable pixel pitch from 100 mm standard spacing to 1000 mm maximum
- 2-meter lead-in cable with 6 × 20 AWG black interconnecting cable
- Peak power consumption: 0.95 W per dot at full intensity, full white
- IP67 protection rating for outdoor and indoor permanent installation; RoHS compliant
- Control via Martin P3 System Controller and/or DMX512 with RDM support
- Clear polycarbonate dot body with clear silicone fill; white translucent polycarbonate diffuser dome available
- Total weight: 1.3 kg for 100 dots at 100 mm spacing with 2 m lead-in
- Minimum cable bend radius: 26 mm for flexible installation around curves and tight spaces
- Power and data input via Martin VC-Feeder with custom 8-pin IP67-rated connector
The VC-Dot 1 delivers calibrated color and intensity consistency across the entire Martin creative LED range, making it the ideal foundation for rapid video mapping, set lighting, and integrated production design with minimal infrastructure overhead.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Martin VC-Dot 1 is a pixel-addressable RGB LED string for studio lighting design, architectural visualization, and video content mapping in controlled environments. Studio designers and producers value its calibrated color mixing, seamless DMX512 integration, and customizable pixel pitch—enabling rapid prototyping of lighting effects and creative setups without tedious configuration. Pick it for clean, consistent color output and flexible control infrastructure that scales from small studio projects to full architectural installations.
Frequently Asked Questions
What control systems work with the VC-Dot 1?
The VC-Dot 1 integrates with the Martin P3 System Controller and DMX512 protocol, including RDM support for flexible lighting-only applications. Control and addressing setup is intuitive, eliminating tedious manual configuration.
Can I adjust the spacing between LEDs?
Yes, pixel pitch is fully customizable from a standard 100 mm spacing up to 1000 mm maximum, allowing you to adapt dot density to your creative vision or structural constraints.
Is this suitable for outdoor use?
Yes, the VC-Dot 1 carries an IP67 protection rating and is designed for both indoor and outdoor permanent installation, with the 2-meter lead-in cable ready for immediate deployment.
What are the brightness and color output specs?
Each dot delivers 2 cd luminous intensity with calibrated RGB output of 1.5 lm red, 3.6 lm green, and 0.4 lm blue, with a 127° × 127° viewing angle that expands to 180° × 180° when fitted with the optional diffuser dome.
How much power does each LED consume?
Peak power consumption is 0.95 W per dot at full intensity and white, enabling efficient operation across large string deployments.