Martin Exterior DC-Feeder
Description
Martin Exterior DC-Feeder
The Martin Exterior DC-Feeder is a robust multi-protocol driver box designed to deliver clean, regulated power to the Exterior Dot-1/4/9 Pro series lighting fixtures in studio and on-location recording environments. Built to maintain stable power distribution across demanding production setups, this feeder ensures consistent fixture performance whether you're lighting a permanent studio installation or mobile recording sessions.
Power Management & Efficiency
Accepts 48 VDC +/- 4% input from industry-standard power supplies and outputs a regulated 15 VDC to connected fixtures. Power consumption scales intelligently: 110 W at full load, dropping to 5.0 W idle and 2.2 W hibernation, making this feeder economical during setup breaks and between recording sessions when fixtures remain connected but unused.
Environmental Durability & Protection
Rated IP66 for complete dust and water ingress protection, the feeder operates reliably across extreme temperature ranges from -30° C to +55° C (-22° F to 131° F). Convection cooling eliminates fan noise—critical for recording sessions where acoustic isolation matters—while 4KV surge protection safeguards connected equipment from electrical transients that can introduce noise or damage lighting rigs during power events.
Key Features
- Nominal input voltage: 48 VDC +/- 4%
- Output voltage: 15 VDC
- Maximum power consumption: 110 W at full load
- Idle power consumption: 5.0 W
- Hibernation power consumption: 2.2 W
- Surge protection: 4KV
- IP66 environmental rating
- Operating temperature range: -30° C to +55° C
- Convection cooling (fanless design)
- Multi-protocol driver for Exterior Dot-1/4/9 Pro series
- Compatible with Martin P3 PowerPort 2000, P3 PowerPort 500 IP Install, P3 PowerPort 500 IP Rental, Martin DCE PSU 240 IP, and generic 48 VDC PSU
The Martin Exterior DC-Feeder combines compact architecture with industrial-grade protection, providing dependable infrastructure for permanent studio lighting systems and on-location recording rigs.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Martin Exterior DC-Feeder is a professional-grade power distribution driver engineered for outdoor lighting rigs and studio installations requiring weatherproof, multi-protocol control of Martin Exterior Dot-1/4/9 Pro series fixtures. Its intelligent power management (110 W full load, 2.2 W hibernation) and IP66 rating make it dependable for both touring setups and stationary studio lighting arrays. Choose this feeder when you need fanless, surge-protected infrastructure that operates reliably across extreme temperature ranges without adding thermal or acoustic noise to your production environment.
Frequently Asked Questions
What fixtures does the Martin Exterior DC-Feeder control?
The feeder is a multi-protocol driver designed specifically for Martin Exterior Dot-1/4/9 Pro series lighting fixtures. It outputs regulated 15 VDC to connected fixtures via 48 VDC input from compatible power supplies.
What power supplies are compatible with this feeder?
The feeder accepts 48 VDC +/- 4% input and is compatible with Martin P3 PowerPort 2000, P3 PowerPort 500 IP Install, P3 PowerPort 500 IP Rental, Martin DCE PSU 240 IP, and generic 48 VDC PSUs.
Is the Martin Exterior DC-Feeder suitable for outdoor use?
Yes—it is rated IP66 for complete dust and water ingress protection, features fanless convection cooling, and operates reliably across extreme temperatures from -30°C to +55°C. It also includes 4KV surge protection against electrical transients common in outdoor installations.
How much power does the feeder consume during idle or standby?
Power consumption is 110 W at full load, 5.0 W during idle, and 2.2 W in hibernation mode, making it economical during extended standby periods.