Laney Nathan EAST signature amplifier head, DIGBETH Series
Description
Laney Nathan EAST DIGBETH Series Signature Bass Amplifier Head
The Nathan EAST DIGBETH is a compact yet commanding bass amp head engineered for professional recording and studio work without sacrificing portability. At just 8.5 kg, this handcrafted UK-built unit delivers studio-grade tone and muscular power in a format that integrates seamlessly into both tracking sessions and live setups. The dual-channel architecture with integrated LA·IR impulse response technology captures Nathan's signature sound directly into your DAW or on the stage.
Power & Amplification for Tracking and Performance
Twin 500W RMS outputs per channel (minimum 4 ohms) drive independent Speakon speaker connections, allowing flexible routing for direct recording or dual-cabinet setups with full-frequency coverage. The FET and Tube channels with remote switchable mix control provide tonal range from articulate, punchy definition to warm, compressed sustain—both controllable from your foot pedal during takes or performances.
Studio Connectivity & Signal Chain
The passive tone stack (Bass, Middle with reshape voice select, Treble) plus Tilt control with independent ±level adjustment on each band gives precise control over your midrange character and overall frequency balance for mix-ready tracking. Complete I/O includes dual 1/4" instrument inputs with remote switching, 2 x XLR DI outputs equipped with LA·IR technology and ground lift for clean console or audio interface connection, USB-C for silent DAW recording, and 3.5mm stereo headphone output with dedicated volume for zero-latency monitoring.
Key Features
- Dual 500W RMS power outputs per channel into minimum 4 ohms
- 2 x Speakon ON compatible outputs (6.3mm jack compatible) with independent power distribution
- 2 Channels: FET and Tube with remote-switchable mix control
- EQ: Bass, Middle (with reshape voice select), Treble (passive tone stack), and Tilt control with ±level on each
- 2 x instrument 1/4" inputs with remote switching; Input 2 includes gain trim matching control
- 10 MΩ input impedance
- 2 x XLR DI outputs with LA·IR technology and ground lift
- USB-C socket for DAW connection and silent recording
- 6.3mm FX send and 6.3mm tuner out
- 3.5mm stereo headphone jack with dedicated volume control
- Laney LA·IR technology with Nathan's signature cabinet impulse responses pre-loaded
- Handcrafted in Laney's Black Country Customs workshop, UK; weighs 8.5 kg in 15mm MDF chassis
This is a serious working bass amp built to exacting standards, combining Nathan EAST's tonal vision with the road-tested reliability Laney is known for.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The Laney Nathan EAST DIGBETH is a 500W dual-channel bass amp head with studio-grade clarity, warm compressed sustain, and surgical midrange control—ideal for recording sessions where you need reliable, articulate tone direct to your DAW. The integrated LA·IR impulse response technology, USB-C recording output, and independent EQ control on each channel give you mix-ready bass tones without post-processing work. Choose this if your studio bass recordings need punchy definition, muscular low end, and the kind of tonal flexibility that Nathan EAST has refined over decades.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Live Performance
- ✓ Touring
- ✓ Funk
Not the best pick for
- – Practice
- – Home Recording on a budget
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the FET and Tube channels?
The FET channel delivers punchy articulation and fast response, while the Tube channel provides warm, compressed sustain. Both are remote-switchable with integrated mix control, so you can blend or toggle between them on stage or in the studio without touching the amp.
Can I record silently to my DAW?
Yes. The amp includes USB-C connectivity and LA·IR impulse response technology loaded with Nathan's signature cabinet responses, allowing you to record directly to your computer without needing external speakers or microphones.
What speaker cabinets does this head work with?
The Nathan EAST has dual 500W RMS outputs per channel (minimum 4 ohms) with 2 x Speakon connectors (6.3mm jack compatible) for flexible speaker configuration. You can run two separate cabinets or one larger setup depending on your venue requirements.
Is this amp suitable for touring musicians?
Yes. At 8.5 kg in a compact UK-built chassis, it's designed for road use without sacrificing tone or power. The dual-channel architecture, remote switching, and studio-grade clarity make it equally reliable in the rehearsal room, on stage, or in the studio.
What EQ options are available?
The passive tone stack includes Bass, Middle with reshape voice select, and Treble controls, plus a Tilt control with independent ±level adjustment on each band. This gives surgical control over your midrange character and overall frequency balance.