JBL Control 68HP-WH 8" HIGH-POWER PENDANT SPKR W CD, WHT
Description
JBL Control 68HP-WH 8" High-Power Pendant Speaker
The Control 68HP-WH is a compact pendant speaker engineered for remote monitoring, outdoor recording setups, and permanent distributed audio systems where consistent coverage and weather resistance matter. Its coaxial design delivers focused sound with minimal installation complexity, making it a dependable choice for field recording venues, covered monitoring stations, and location sound reinforcement systems.
Acoustic Performance for Recording & Monitoring
This speaker produces 114 dB continuous SPL and 120 dB peak SPL at 1 meter, powered by a 250-watt continuous pink noise capacity (1000W peak). The combination of an 8-inch Kevlar-reinforced woofer and 1-inch titanium compression driver delivers articulate midrange and extended bass down to 72 Hz, with 110° constant directivity coverage that ensures even monitoring distribution across studio or on-location session spaces.
Build & Integration
Constructed from high-impact polystyrene with a zinc-plated steel grille and powder-coat finish, the enclosure carries an IP44 weather rating for outdoor recording durability. Installation integrates seamlessly through dual 4.5-meter high-tensile galvanized steel wire rope systems (main and safety suspension), eliminating the need for additional hardware sourcing during session setup.
Key Features
- 8-inch (209mm) Kevlar-reinforced low-frequency driver with 50mm voice coil
- 1-inch (25mm) coaxially-mounted titanium dome compression driver
- 250 watts continuous pink noise power; 1000 watts peak (2 hr rating)
- 114 dB continuous SPL; 120 dB peak SPL at 1 meter
- 68-watt multi-tap transformer switchable between 70V/100V distributed lines and 8-ohm direct operation
- Frequency response: 72 Hz – 16 kHz
- 110° constant directivity conical coverage pattern
- IP44 weather rating; high-impact polystyrene enclosure with powder-coat steel grille
- Two complete suspension cable systems included (main and safety); UL-listed fasteners
- Available in white (-WH) finish; paintable enclosure
The Control 68HP-WH combines recording-grade reliability with straightforward deployment, making it a solid foundation for distributed monitoring and location audio systems that demand durability and consistent output.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The JBL Control 68HP-WH is a weather-sealed pendant speaker suited to location recording, outdoor broadcast, and venue-wide sound reinforcement where durability and consistent frequency response matter more than intimate studio aesthetics. Its 72 Hz–16 kHz response, coaxial design, and switchable 70V/100V operation make it flexible for distributed recording systems and environmental audio capture, though it is engineered for installation rather than close-field monitoring or mixing. Choose it when you need a field-deployable speaker that can handle permanent or semi-permanent outdoor recording setups.
Who This Is For
Great for
- ✓ Live Performance
- ✓ Installation Audio
- ✓ Outdoor Venues
- ✓ Distributed PA Systems
Not the best pick for
- – Home Recording
- – Studio Sessions
- – Intimate Venues
Skill level: Professional
Frequently Asked Questions
What does IP44 weather rating mean for outdoor use?
IP44 means the speaker is protected against water splashing from any direction and dust ingress, making it suitable for covered patios, overhangs, and outdoor venues where it won't face direct rain or submersion. The high-impact polystyrene enclosure and powder-coat steel grille are designed to resist corrosion and UV degradation in open-air installations.
Can I hang this speaker without buying additional hardware?
Yes. The Control 68HP-WH includes dual 4.5-meter high-tensile galvanized steel wire rope suspension systems (one main cable, one safety cable) and UL-listed fasteners, so you avoid sourcing separate rigging hardware.
Does it work on 70V and 100V distributed lines?
Yes. The built-in 68-watt multi-tap transformer is switchable between 70V, 100V distributed operation, and 8-ohm direct impedance, giving you flexibility to integrate it into existing commercial audio systems or run it standalone.
What's the difference between continuous and peak SPL ratings?
Continuous SPL (114 dB at 1 meter) is the steady output you can expect during normal operation; peak SPL (120 dB) is the maximum short-burst output the speaker can handle. The 250-watt continuous and 1000-watt peak power ratings reflect the same sustained vs. dynamic distinction.
Is the white enclosure paintable if I need to match a venue?
Yes. The enclosure is paintable, so you can match it to your venue's color scheme or branding without any cosmetic compromise to the speaker's function.
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.