EMG TC Active Single Coil Pickup Set in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3070
Description
EMG TC Active Single Coil Pickup Set in White
The EMG TC Active Single Coil Pickup Set captures articulate, high-output tone through a pair of ceramic-magnet pickups engineered for clarity and punch in the studio. This solderless wiring system streamlines installation, making it practical for engineers and producers who want professional results without complex circuitry. The white finish integrates cleanly into most instrument aesthetics while maintaining the aggressive sonic character EMG is known for.
Recording Tone & Electronics
Ceramic magnets provide enhanced high-end response and increased output compared to alnico designs, giving you aggressive treble definition and cutting sustain that cuts through dense mixes. The RTC bridge and FTC neck pickups work together to cover a wide range from bright, articulate lead passages to punchy rhythm tones, with 25K Ohm volume and tone potentiometers providing precise control over your signal shaping during tracking and mixing.
Installation & System Design
The solderless wiring architecture eliminates traditional soldering requirements, cutting installation time significantly and reducing the risk of heat damage to components. All necessary connectors—pickup cables, output cable, battery cable, and connect cables—arrive pre-measured and ready to integrate, alongside the stereo output jack, 3-way selector switch, volume pot, and tone pot for fast session setup.
Key Features
- Two-pickup set: RTC bridge and FTC neck configurations
- Ceramic magnets for enhanced high-end and increased output
- Active electronics drawing 160 microamps at 9V
- Battery life rated at 1500 hours
- 25K Ohm volume potentiometer
- 25K Ohm tone potentiometer
- Solderless wiring system for quick installation
- Stereo output jack included
- Pickup cables: 13.5" (34cm) and 9" (23cm)
- Output cable: 6" (15cm), battery cable: 7" (18cm), two connect cables: 5.5" (14cm)
- White finish
- 3-way selector switch included
This set delivers the aggressive EMG tone signature in a modern, solderless package that respects both your recording vision and your studio setup workflow.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG TC Active Single Coil Pickup Set brings aggressive high-end response and ceramic brightness to your recordings, with the RTC bridge and FTC neck configurations covering everything from articulate lead lines to punchy rhythm tracks in the mix. The solderless active electronics system simplifies integration into your instrument and session workflow, and the included connectors and controls let you shape your tone precisely during tracking and mixing. Pick this set to capture cutting, modern metal and progressive tones with clarity and punch.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Djent |
|---|---|
| Tonal character | Aggressive treble, high output, articulate, cutting sustain, ceramic brightness |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced / Professional |
Frequently Asked Questions
Do I need to solder these pickups, or is installation straightforward?
No soldering required. The EMG TC system uses solderless wiring with pre-measured, color-coded connectors that plug together directly. All cables, the stereo output jack, 3-way selector, volume pot, and tone pot arrive ready to integrate, cutting installation time and eliminating heat-damage risk.
What tone character should I expect?
Expect aggressive treble, high output, and ceramic brightness with articulate lead clarity and punchy rhythm tones. These pickups cut through a mix with cutting sustain and are voiced for metal, hard rock, progressive, and djent styles. They are not designed for jazz, blues, or folk.
What's included in this set, and what do I need to supply?
The set includes the RTC bridge and FTC neck pickups, all pickup and output cables (pre-cut to length), battery cable, stereo output jack, 3-way selector switch, 25K Ohm volume pot, 25K Ohm tone pot, and connect cables. You will need a 9V battery and an instrument with a routing cavity large enough to accommodate the electronics.
How long will the battery last?
The active electronics draw 160 microamps at 9V, with a rated battery life of 1500 hours of typical use. That translates to roughly 2–3 months of regular playing before replacement is needed.
How do these compare to other high-output single coils?
The EMG TC uses ceramic magnets for enhanced high-end response and increased output, offering more aggression and clarity than traditional alnico designs. Comparable models like the Seymour Duncan Quarter Pound and DiMarzio Evolution also deliver high output, but EMG's active system and solderless integration make this set faster to install and road-friendly.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $14 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.