EMG SV Active Single Coil Pickup Set in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG595
Description
EMG SV Active Single Coil Pickup Set in Black
The EMG SV captures tight, articulate single-coil character with the noise floor and output consistency of active electronics—ideal for tracking and layering in home studios. Built for clarity and definition without hum, these pickups offer staggered pole pieces that respond naturally across the fretboard while maintaining the focused midrange presence active designs deliver, translating to recordings that cut through dense mixes with minimal phase issues or unwanted artifacts.
Tone & Recording Character
Built around Alnico V magnets and staggered Alnico V pole pieces, these pickups center their response at 3.20 kHz for articulate, punchy character that sits well in a mix. The integrated preamp achieves an output noise floor below -115 dBV, delivering 0.7V RMS and 1.0V peak output with virtually silent operation—a critical advantage over passive single coils during high-gain overdubs or when layering multiple takes in the DAW without background noise contamination.
Integration & Workflow
The set arrives fully configured with three EMG Quik-Connect cables, a prewired control assembly featuring volume and dual tone controls, a 5-way selection switch, output jack, battery clip, and all necessary hardware. Current draw sits at 660 microamps @ 9V, providing extended battery life during session work compared to high-current active designs, while the 5.0 kΩ output impedance ensures clean, impedance-matched signal transmission to your audio interface or preamp without loading artifacts.
Key Features
- Staggered Alnico V pole pieces for responsive, even string articulation
- Alnico 5 magnets for focused midrange and clarity
- Resonant frequency: 3.20 kHz
- RMS output voltage: 0.7V
- Peak output voltage: 1.0V
- Output noise: -115 dBV (active preamp noise floor below -100 dBV)
- Output impedance: 5.0 kΩ
- Current draw: 660 microamps @ 9V
- Three EMG Quik-Connect cables included
- Prewired control set with volume, 2-tone controls, 5-way switch, jack, and battery clip
- Bridge, Middle, and Neck position configuration
- Manufactured in the United States
This active single-coil set combines low-noise operation with genuine single-coil response, making it reliable for home producers and engineers prioritizing hum-free tracking and the defined, cutting character that translates accurately through DAW monitoring and mix-down workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG SV active single-coil set captures articulate, hum-free tone with exceptional clarity and a noise floor below -115 dBV, making it ideal for recording sessions where tonal definition and tracking consistency matter. The Alnico V construction and centered 3.20 kHz resonance sit naturally in a mix with punchy midrange presence and tight lows, while the 0.7V RMS output and 5.0 kΩ impedance integrate cleanly with any preamp or interface. With prewired controls and Quik-Connect cables included, installation and signal chain setup are streamlined for productive studio workflow.
Who This Is For
| Best suited for | Studio Sessions, Home Recording, High-Gain, Extended Range |
|---|---|
| Tonal character | Tight low end, articulate mids, punchy character, hum-free, focused midrange |
| Less specialized for | Traditional Jazz, Vintage Tone Purists (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's included in the EMG SV set?
The set includes bridge, middle, and neck pickups, three EMG Quik-Connect cables, a prewired control assembly with volume and dual tone controls, a 5-way selector switch, output jack, battery clip, and all necessary hardware for installation.
Will these pickups eliminate hum?
Yes. The integrated active preamp achieves an output noise floor below -115 dBV, delivering virtually silent operation—a major advantage over passive single coils in high-gain scenarios and studio tracking where background noise matters.
How long do the batteries last?
Current draw is 660 microamps at 9V, which is lower than many high-output active designs and provides extended battery life compared to competing active systems.
What tone character should I expect?
The SV delivers tight lows, articulate mids, and punchy character with focused midrange presence. The Alnico V magnets and staggered pole pieces are centered at 3.20 kHz for clarity and definition without the thin character of some active designs.
What genres and playing styles are these best suited for?
These pickups excel in studio sessions, high-gain playing, and extended-range applications where clarity and hum-free performance are priorities. They are less ideal for traditional jazz or vintage tone purists seeking passive single-coil authenticity.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $19 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.