EMG Super 77 Long Shaft Retro Active Humbucker Pickup Set in Zebra
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5980
Description
EMG Super 77 Long Shaft Retro Active Humbucker Pickup Set in Zebra
The EMG Super 77 captures open-coil, copper-wound character with the clarity of active output and solderless installation for seamless tracking sessions. This zebra-finish set pairs ceramic magnets with a plug-on preamp design, delivering vintage passive tonality with modern noise rejection—ideal for layering multiple takes without hum contamination in the mix.
Recording Tone & Electrical Performance
The neck pickup operates at 3.1K Ohm DC resistance with a 3.12 kHz resonant frequency, producing 4.25V on single notes and 8.0V max on strums with ultra-low -98 dB output noise at 60 Hz. The bridge pickup matches the neck's impedance at 3.1K Ohm but sits at 2.33 kHz resonance, yielding 4.0V single-note output and 8.0V max strum output with -96 dB noise floor, ensuring clarity across the frequency spectrum during multitrack work and gain-stacking applications.
Studio Integration & Battery Efficiency
The solderless system streamlines installation into existing guitar electronics without rewiring downtime, while 2-wire plus battery connectivity simplifies integration into your recording setup. The set draws only 350 µA at 9V, delivering approximately 715 hours of battery life per charge, and tolerates input voltage up to 27V DC for flexible power options across multiple sessions and extended studio days.
Key Features
- Open-coil, copper-wound ceramic-magnet construction
- Passive pickups with plug-on preamp for active output
- Neck: 3.1K Ohm, 3.12 kHz resonance, 4.25V single-note / 8.0V max output, -98 dB noise floor
- Bridge: 3.1K Ohm, 2.33 kHz resonance, 4.0V single-note / 8.0V max output, -96 dB noise floor
- 350 µA current draw at 9V, ~715-hour battery life
- Maximum supply voltage 27V DC
- Includes 2 × 25K split-shaft volume pots, 2 × 25K split-shaft tone pots
- Battery bus, stereo output jack, mounting screws, springs, and cables included
- Solderless installation system
- 2-wire plus battery connectivity
- Zebra finish
- Package dimensions: 8 × 5 × 2 inches
This retrofit set combines low-noise recording capture and extended battery endurance with straightforward solderless integration, making it practical for producers upgrading passive electronics without extensive modification during critical recording sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG Super 77 brings open-coil copper-wound tone into your recording chain with active output, ultra-low noise, and plug-and-play solderless installation. The neck and bridge pickups are matched for consistency across sessions, with high headroom and extended battery life (715 hours per 9V cell) that keeps you recording without interruption. Perfect for home studio upgrades, these pickups capture vintage character with modern clarity, sitting cleanly in the mix and simplifying your signal path from guitar to interface.
Who This Is For
| Best suited for | Home Recording, Studio Sessions, Practice |
|---|---|
| Tonal character | Open-coil character, low noise floor, balanced neck/bridge response, high headroom, vintage passive warmth with modern clarity |
| Less specialized for | Live Performance, Touring (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced |
Frequently Asked Questions
What does 'active' mean on these pickups, and do I need a battery?
These pickups use passive copper-wound ceramic magnets with a plug-on preamp stage that requires a 9V battery for active output. The battery lasts approximately 715 hours at normal current draw (350 µA), and the system tolerates input voltage up to 27V DC for flexible power options.
Do these pickups require soldering to install?
No—the EMG Super 77 uses a solderless installation system with 2-wire plus battery connectivity and included mounting hardware. The set comes with two split-shaft volume pots, two split-shaft tone pots, battery bus, stereo output jack, and all cables needed for integration.
How do the neck and bridge pickups differ tonally?
Both pickups sit at 3.1K Ohm impedance but have different resonant frequencies: the neck peaks at 3.12 kHz for a warmer, fuller response, while the bridge sits at 2.33 kHz for tighter, more defined articulation. Output levels are matched at 4.25V and 4.0V single-note respectively, with both reaching 8.0V on hard strums.
What skill level do I need to install this set?
Beginner to advanced players can handle installation thanks to the solderless design; no soldering experience required. The system is straightforward enough for practice and home studio use, and the included cables and pots simplify the retrofit process.
How do these compare to other active pickups like the EMG 81/85?
The Super 77 emphasizes open-coil copper-wound character with balanced neck/bridge response, whereas the 81/85 pairing is designed for aggressive high-output performance. The Super 77 prioritizes studio versatility and low-noise floor, making it better suited for recording and practice than live touring applications.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $15 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.