EMG SLV Active Single Coil Pickup in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2608
Description
EMG SLV Active Single Coil Pickup in White
The EMG SLV delivers articulate, punchy single-coil response with the noise floor and output consistency of active electronics. This pickup pairs classic single-coil clarity with modern low-impedance design, making it a straightforward drop-in replacement for tracking sessions that demand definition and quiet operation without sacrificing character.
Tone & Output Performance
A 3.75 kHz resonant frequency anchors the SLV's midrange presence, keeping vocals and melodic content cutting through dense mixes while 0.7 V RMS output and 1.0 V peak output deliver ample signal headroom into any interface or mixing setup. The -90 dBV output noise floor ensures clean recording free of hum and hiss, even when stacking takes or layering multiple guitar tracks at high gain.
Design & Specifications
Built with Alnico 5 pole pieces in a flat configuration, the SLV maintains single-coil harmonic character for authentic tone capture while its 10 kΩ output impedance integrates seamlessly with standard guitar electronics and recording chains. The included Quik-Connect cable and prewired control set simplify installation and minimize solder joints for faster setup between sessions.
Key Features
- Type: Single coil active pickup
- Magnet: Alnico 5 pole pieces, flat configuration
- Resonant Frequency: 3.75 kHz
- RMS Output Voltage: 0.7 V
- Peak Output Voltage: 1.0 V
- Output Noise: -90 dBV
- Output Impedance: 10 kΩ
- Power Requirement: 9V battery
- Current Draw @ 9V: 240 microamps
- Battery Life: 1000 hours
- Includes: Quik-Connect cable, prewired volume/tone control set, output jack, battery clip set, mounting screws and springs
- Finish: White
The EMG SLV combines single-coil tone with active-circuit reliability, backed by a complete installation package ready for immediate tracking and mixing integration.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG SLV captures articulate single-coil clarity with the low-noise floor and output headroom that active electronics deliver, making it an excellent choice for home studio work, drop-tuned recordings, and sessions where definition and quiet operation matter. Its 3.75 kHz midrange presence and 0.7 V RMS output sit cleanly in a mix without sacrificing character, and the -90 dBV noise floor ensures hum-free tracking even when stacking gain in the interface or DAW. Complete with Quik-Connect cable and prewired controls, installation is minimal—get to recording quickly.
Who This Is For
Great for
- ✓ Drop Tunings
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Live Performance
Not the best pick for
- – Traditional Jazz
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
What makes an active single-coil pickup different from a passive one?
Active pickups use a 9V battery-powered preamp to amplify the signal directly at the source, resulting in lower noise, higher and more consistent output voltage, and less impedance sensitivity than passive designs. The EMG SLV outputs 0.7 V RMS with a noise floor of -90 dBV, enabling clean amplification even at high gain settings without sacrificing single-coil tone character.
How long does the 9V battery last?
Battery life is rated at 1000 hours of typical use, drawing only 240 microamps at 9V. The pickup includes a battery clip set, and a battery should be replaced when you notice a drop in output volume or tone clarity.
Is this pickup suitable for drop tunings?
Yes, the EMG SLV is explicitly designed for drop tunings and delivers articulate, punchy response even in lower tunings. Its high output headroom and active circuitry maintain definition and clarity across a wider frequency range than passive single-coils, making it well-suited to heavy and experimental tones.
What comes in the box, and how difficult is installation?
The package includes the pickup, Quik-Connect cable, prewired volume and tone control set, output jack, battery clip set, and mounting hardware. Quik-Connect eliminates solder joints and simplifies wiring, making installation straightforward for intermediate players; you'll still need to route the output and manage the 9V battery cavity.
How does the SLV compare to passive single-coil pickups?
The SLV combines single-coil harmonic character with active-circuit benefits: 0.7 V RMS output (versus 100–200 mV for passive), a noise floor of -90 dBV (virtually silent), and consistent signal across gain settings. You trade passive simplicity for modern noise rejection and higher headroom into amps and interfaces.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.