EMG SAX Active Single Coil Pickup in Ivory
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3104
Description
EMG SA-X Active Single-Coil Pickup in Ivory
The EMG SA-X delivers the articulate, high-output character of EMG's active single-coil design in a compact footprint. This pickup pairs a close-aperture alnico V magnet with EMG's newly designed active preamp, producing clarity and definition across the frequency spectrum without the noise floor of passive designs. Capture transparent treble response and controlled low-end in a single-coil format, making it ideal for tracking sessions where every harmonic matters.
Tone & Electrical Performance
A resonant frequency of 4.05 kHz keeps the midrange articulate while the 1.00 V string output and 8.00 V strum output provide enough headroom for clean or overdriven tones. The -107 dB output noise floor (60 Hz) ensures this active design stays quiet even at high gain, and the 2.00 kΩ output impedance maintains signal integrity into any amp, interface, or effects chain during recording and mixing.
Build & Installation
The Alnico V magnet and active design eliminate hum while preserving single-coil brightness—critical for studio recordings where hum can contaminate a take. Power comes from a single 9V battery with 80 microamps draw—expect roughly 3000 hours of battery life—and the circuit supports up to 27 V DC maximum supply for future flexibility. Installation is streamlined with the included Solderless Quik-Connect system, and the package arrives with a split shaft volume/active tone control, output jack, battery clip, screws, and springs.
Key Features
- Active single-coil pickup with close aperture coils
- Alnico V magnet for articulate treble and controlled low-end
- Newly designed active preamp circuitry
- Resonant Frequency: 4.05 kHz
- String Output: 1.00 V; Strum Output: 8.00 V
- Output Noise: -107 dB (60 Hz)
- Output Impedance: 2.00 kΩ
- 9V battery power; 80 microamps current draw; 3000-hour battery life
- Maximum Supply: 27 V DC
- Gold logo finish
- Solderless Quik-Connect system for fast installation
- Includes split shaft tone control, output jack, battery clip, and mounting hardware
The SA-X combines the sensitivity and dynamic range of a true single-coil with active electronics that cut through noise—a direct path to transparent, articulate tracking and mixing in the studio.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG SA-X is an active single-coil pickup engineered for transparent, articulate recording with minimal noise, making it a strong choice for home studios and session work in funk, pop, and contemporary styles. Its 4.05 kHz resonant frequency keeps the midrange definition clear and sits well in a mix, while the -107 dB noise floor ensures clean tracking at any input level without hum or buzz. The included split-shaft tone control and 9V battery power (3000-hour life) integrate easily into most recording rigs, delivering dynamic range and sensitivity that captures every nuance of your playing.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Live Performance
- ✓ Funk
- ✓ Pop
Not the best pick for
- – Metal
- – Thrash Metal
- – Drop Tunings
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is included in the package?
The SA-X comes with the active pickup, a split shaft volume and active tone control, output jack, battery clip, mounting screws, springs, and the Solderless Quik-Connect system for fast installation.
How long does the 9V battery last?
With an 80 microamps current draw, a single 9V battery provides approximately 3000 hours of playing time.
Is this pickup suitable for metal or drop-tuning styles?
No; the SA-X is designed for studio sessions, live performance, funk, and pop. Its articulate single-coil character and controlled low-end are optimized for these genres rather than metal or thrash applications.
What makes this active pickup different from a passive single-coil?
The active preamp circuitry delivers 1.00 V string output and 8.00 V strum output with a -107 dB noise floor, eliminating hum while preserving single-coil brightness and providing enough headroom for both clean and overdriven tones.
Can I upgrade the battery voltage in the future?
Yes; the circuit supports up to 27 V DC maximum supply, giving you flexibility if you want to experiment with higher supply voltages down the road.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.