EMG SA Active Single Coil Pickup Set in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2600
Description
EMG SA Active Single Coil Pickup Set in White
The EMG SA set captures articulate, punchy single-coil character with the noise immunity and extended dynamic range of active electronics—ideal for recording sessions where clarity and definition drive the final mix. These covered Alnico V pickups respond cleanly across the entire frequency spectrum, translating equally well to classic rock, country, and modern production styles. The solderless Quik-Connect system eliminates complex wiring, and the included pre-wired control set gets your instrument session-ready within minutes.
Electronics & Performance
Active circuitry powered by a single 9V battery produces a 0.6V RMS output with 0.85V peak voltage and a noise floor of −90 dBV, ensuring transparent signal transmission with minimal hum or interference in the tracking chain. The 3.75 kHz resonant frequency and 10 kOhm output impedance yield focused mid-range presence and excellent compatibility with both tube and solid-state amplifiers, preamps, and interface inputs. Battery life extends to approximately 1,000 hours of typical use, keeping downtime minimal during extended recording sessions.
Installation & Rapid Integration
This SSS Strat-sized set ships with three covered pickups, a 5-way selector switch, volume and tone controls, output jack, battery clip, and color-matched cables—everything needed for a complete retrofit. The solderless connectivity and 2-wire plus battery configuration eliminate the need for heavy modification, allowing fast integration into your recording setup without requiring extensive electronics knowledge or workshop time.
Key Features
- 3 EMG-SA Active Single-Coil Pickups with Alnico V magnets
- Covered pickup design in white finish
- Strat-sized (SSS) configuration for 6-string guitars
- Quik-Connect solderless cable system
- Pre-wired control set: volume, tone, 5-way switch, output jack, battery clip
- DC Resistance: 10K ohms
- RMS Output Voltage: 0.6V; Peak Output Voltage: 0.85V
- Output Noise: −90 dBV
- Resonant Frequency: 3.75 kHz
- Output Impedance: 10 kOhms
- Current draw @ 9V: 240 microamps
- Battery life: approximately 1,000 hours
The EMG SA combines the responsiveness of single-coils with the reliability and signal integrity of active electronics, delivering consistent, hum-free tracking performance and predictable behavior across multiple takes and session environments.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG SA active single-coil set captures clean, articulate tone with a focused mid-range presence and 0.6V RMS output that sits perfectly in recorded tracks without excessive noise—making it a no-fuss upgrade for home studio and demo work. The solderless wiring and pre-assembled control plate eliminate installation complexity, so you can dial in classic-rock and country tones without days of troubleshooting; active electronics ensure every note records with transparency and consistency across full frequency range. Pick this set if you're retrofitting a Strat-style guitar for studio sessions and want plug-and-play reliability with genuine single-coil articulation.
Who This Is For
Great for
- ✓ Classic Rock
- ✓ Country
- ✓ Pop
- ✓ Studio Sessions
- ✓ Home Recording
Not the best pick for
- – Metal
- – Thrash Metal
- – Djent
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
What guitar does this fit and what tools do I need to install it?
The EMG SA is sized for standard Stratocaster SSS (three single-coil) cavities in 6-string guitars. Installation requires basic screwdrivers and soldering tools for the output jack if you don't use the included pre-wired harness; the Quik-Connect solderless cables simplify the pickup-to-control connections significantly.
How long does the 9V battery last and will it go dead mid-gig?
Battery life is approximately 1,000 hours of typical use at 240 microamps current draw. Most players get 2–6 months per battery depending on practice and playing frequency, so regular battery changes (not emergency mid-show deaths) are the norm.
Will these pickups work well with both tube and solid-state amps?
Yes—the 10 kOhm output impedance and 3.75 kHz resonant frequency are designed for excellent compatibility with both amp types, delivering focused mid-range presence and transparent signal transmission to either platform.
What's included in the box and do I need to buy anything else?
The set ships with three covered pickups, a 5-way selector switch, volume and tone controls, output jack, battery clip, color-matched cables, and everything needed for a complete retrofit on a Strat-sized guitar. You'll need one 9V battery to power them.
How do these pickups compare to passive single-coils in tone and noise?
The EMG SA keeps the articulate, punchy character of single-coils but adds active circuitry for a noise floor of −90 dBV (virtually silent) and extended dynamic range, eliminating hum and interference that plague passive setups while maintaining clarity and definition across the frequency spectrum.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $20 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.