EMG RTX Active Single Coil Pickup in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5283
Description
EMG SA Active Single Coil Pickup in Red
The EMG SA captures articulate, punchy single-coil character with the clarity and noise rejection that active electronics provide. This red-finished unit maintains the familiar single-coil form factor while offering the extended frequency response and low-noise performance that define EMG's active platform. Built for recording and mixing scenarios where defined treble, controlled midrange, and reliable signal integrity are essential.
Active Electronics & Noise Performance
Running on a single 9V battery with a maximum supply voltage of 27V DC, this pickup achieves –101 dB output noise at 60 Hz, virtually eliminating hum and interference that compromise tracking clarity in home studios and professional recording environments. Battery life reaches approximately 3000 hours of typical use, making extended recording and session work practical without frequent changes.
Tone & Output Characteristics
The Alnico V bar magnet and 3.70 kHz resonant frequency produce a bright, articulate voice with string definition and responsive dynamic range that translates well through audio interfaces and mixing consoles. String-level output sits at 1.00V with a strum peak of 3.00V, providing adequate signal for both clean and overdriven tracking without excessive gain staging or noise floor concerns during record.
Key Features
- Magnet Type: Alnico V bar
- Resonant Frequency: 3.70 kHz
- Output Voltage (String): 1.00V
- Output Voltage (Strum): 3.00V
- Output Noise: –101 dB @ 60 Hz
- Output Impedance: 10 Kohm
- Current Draw @ 9V: 80 Microamps
- Maximum Supply Voltage: 27V DC
- Battery Life: 3000 hours
- Connector: 4-conductor (ground, hot, hot, shield)
- Finish: Red
- Material: Metal construction
The EMG SA in red combines the approachable single-coil aesthetic with the technical advantages of active circuitry, making it a practical choice for both retrofit upgrades and new builds seeking noise-free, articulate single-coil tone suited to demanding studio and production work.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG RTX Active Single Coil captures articulate, punchy single-coil character with exceptional noise rejection—achieving –101 dB output noise at 60 Hz, ideal for layering tracks without hum interference. The Alnico V magnet and 3.70 kHz resonant frequency yield bright, defined treble and controlled midrange that cuts through dense mixes while maintaining dynamic response across clean and driven tones. Choose this for retrofit upgrades or new builds when you need noise-free single-coil clarity that sits well in recordings without sacrificing string definition.
Who This Is For
| Best suited for | Studio Sessions, Live Performance, Home Recording |
|---|---|
| Tonal character | Articulate, punchy, bright treble, controlled midrange, low-noise |
| Less specialized for | Drop Tunings, Extended Range (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What kind of noise performance does this active pickup offer?
The EMG RTX achieves –101 dB output noise at 60 Hz, virtually eliminating the hum and interference common to passive single coils. It runs on a single 9V battery with a maximum supply voltage of 27V DC and draws only 80 microamps, giving approximately 3000 hours of battery life under typical use.
What is the tonal character, and will it work for both clean and overdriven sounds?
The Alnico V bar magnet and 3.70 kHz resonant frequency produce bright, articulate tone with defined treble and controlled midrange. String-level output is 1.00V with a 3.00V strum peak, providing adequate signal for both clean and overdriven applications without excessive preamp drive or noise floor issues.
What tunings and instrument types is this pickup designed for?
The EMG RTX is optimized for standard and alternate tunings on instruments using single-coil configurations. It is not recommended for drop tunings or extended-range instruments, as its voice is voiced for articulate single-coil performance in those contexts.
How does this compare to passive single-coil pickups like Seymour Duncan Hot Rails or DiMarzio Fast Track?
Unlike passive alternatives, the EMG RTX delivers active noise rejection (–101 dB at 60 Hz) and extended frequency response with low battery draw, eliminating hum while maintaining single-coil clarity. Its active platform provides more consistent output and lower impedance (10 Kohm) for cleaner signal transmission to your preamp or interface.
What connector and wiring does this pickup use?
The EMG RTX uses a 4-conductor connector (ground, hot, hot, shield) and requires a 9V battery connection for the active circuit. Installation requires routing for the battery compartment if retrofitting into an existing instrument.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.