EMG PX Active Bass Pickup in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5605
Description
EMG PX Active Bass Pickup in Red
The EMG PX is a compact, punchy active P-bass pickup engineered for recording clarity and articulation without sacrificing low-end presence. Its split-coil design and ceramic magnet deliver tight, defined response across the frequency spectrum, translating to clean, focused bass tracks in the mix and precise response during overdubs. The red finish adds visual distinction to any instrument.
Active Electronics & Recording Character
Powered by a single 9V battery with an impressive 3,000-hour lifespan, the PX generates 2.00V output in finger/thumb mode and 8.50V in thump mode, delivering substantial headroom and dynamic range for session versatility. The -106dB output noise floor at 60Hz ensures pristine signal transmission with minimal hum—essential in the studio where noise becomes audible through compression or high-resolution monitoring and tracking chains.
Electrical Specifications & Installation
This 2K ohm DC resistance pickup operates efficiently across the EMG ecosystem with 2 kohm output impedance and draws only 80µA at 9V, preserving battery life during extended recording sessions. Maximum supply voltage reaches 27V DC, and the 3.20kHz resonant frequency centers the pickup's character in the upper midrange where P-bass articulation cuts through in a mix. The solderless design with included mounting and cabling hardware streamlines installation and setup.
Key Features
- Single-coil P-style split-coil configuration
- Active design with ceramic magnet
- 4-string instrument compatibility
- 2K DC resistance
- 3.20kHz resonant frequency
- 2.00V output (finger/thumb) / 8.50V output (thump)
- -106dB output noise at 60Hz
- 2 kohm output impedance
- 80µA current draw at 9V
- 27V DC maximum supply voltage
- 3,000-hour battery life
- Solderless installation with mounting and cabling hardware included
The PX combines low noise, dynamic output range, and straightforward installation to capture modern active bass tone with precision and consistency across studio sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG PX active P-bass pickup delivers studio-grade clarity and articulation with a tight, defined low end and an ultra-low noise floor (-106dB at 60Hz)—essential when tracking modern bass through compression or high-gain effects. Its dual-output modes (2V standard / 8.5V thump) give you flexible headroom in the mix, while the ceramic magnet and 3.20kHz resonance emphasize the upper midrange punch that sits perfectly in contemporary recordings. Install it solderless, trust the 3,000-hour battery, and capture clean, punchy bass tones every session.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Funk
- ✓ Precision-focused recording
- ✓ Modern bass work
Not the best pick for
- – Traditional Jazz
- – Vintage tone purists
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
What is the output difference between finger/thumb mode and thump mode?
Finger/thumb mode delivers 2.00V output for controlled, articulate playing, while thump mode generates 8.50V for aggressive slap and percussive tones with greater dynamic range. Both modes feed substantial headroom into your amplifier or interface.
How long does the 9V battery last?
The internal 9V battery is rated for 3,000 hours of operation, which translates to several months of regular playing before replacement. The pickup draws only 80µA at 9V, optimizing battery longevity.
Is the EMG PX suitable for traditional jazz bass playing?
The PX is engineered for modern bass work, funk, and studio precision; its tight low end and articulate midrange favor contemporary tones rather than the warm, vintage character traditional jazz players typically seek. Consider it best suited to modern, aggressive styles.
What is included for installation?
The PX comes with solderless mounting hardware and cabling included, allowing straightforward plug-and-play installation without soldering. The 2K ohm DC resistance and compact split-coil design fit standard P-bass cavities.
How quiet is this pickup in noisy environments?
The output noise floor measures -106dB at 60Hz, one of the cleanest active designs available. This ultra-low noise matters in studio recording and live settings where compression or high-gain amplification would otherwise amplify hum.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.