EMG PJX Active Bass Pickup Set in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3109
Description
EMG PJX Active Bass Pickup Set in White
The EMG PJX captures articulate, modern bass tone with the headroom and responsiveness that active electronics provide in the studio. This ceramic magnet pickup set pairs a precision-style front pickup with a jazz-style rear pickup, engineered to sit clearly in dense mixes while maintaining definition across the full frequency spectrum. The included solderless wiring harness eliminates the need for soldering, making installation straightforward for experienced technicians and streamlining session setups.
Tone & Output Character
The PX pickup (neck position) resonates at 3.20 KHz with 2.00V output on strings and 8.50V on thump, capturing definition and attack for balanced low-mid presence in recordings. The LJX pickup (bridge position) sits at 4.05 KHz with 2.00V string output and 8.00V thump output, anchoring the low end with articulate response that translates well to tracking and mixing. Both pickups maintain low noise floors (−106 dB and −105 dB respectively at 60 Hz) and share 2.00 Kohm output impedance for transparent signal integrity through your interface and outboard gear.
Electronics & Integration
The system includes an active VLPF tone control designed to roll off high frequencies with surgical precision, allowing you to dial in brightness during tracking or adjust character during overdubs without sacrificing presence in the mix. The complete wiring harness ships with two 25K volume potentiometers, one 25K active tone pot, battery bus, stereo output jack, two-pickup switching bus, pickup and connection cables, output cable, and battery cable—everything needed for immediate integration into your recording setup.
Key Features
- Active PJ bass pickup set with increased headroom
- Ceramic magnet construction
- White finish
- PX pickup: 3.20 KHz resonant frequency; 2.00V string output; 8.50V thump output; −106 dB noise floor
- LJX pickup: 4.05 KHz resonant frequency; 2.00V string output; 8.00V thump output; −105 dB noise floor
- Both pickups: 2.00 Kohm output impedance
- Active VLPF tone control for high-frequency roll-off
- Solderless wiring harness included
- Two 25K volume potentiometers and one 25K active tone pot
- Complete accessory package: battery bus, stereo output jack, pickup/connection cables, output and battery cables, mounting hardware
This pickup set combines precise tonal shaping with straightforward installation, delivering the controlled articulation and extended frequency response needed for professional bass recordings and versatile session work.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG PJX delivers the articulate, high-headroom tone that modern studio bass tracks demand, with a precise P/J configuration that maintains clarity across dense mixes without muddiness. The active VLPF tone control lets you sculpt brightness with surgical precision, while low noise floors and transparent signal path integrity ensure your bass sits cleanly in the mix. Ideal for recording funk, progressive, and modern jazz where definition and cut-through matter, and the complete wiring harness with solderless connections makes installation straightforward for any tech-savvy engineer or player upgrading an instrument.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Gigging
- ✓ Modern Jazz
- ✓ Funk
- ✓ Progressive
Not the best pick for
- – Traditional Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between the PX and LJX pickups in this set?
The PX (neck position) resonates at 3.20 KHz with 2.00V string and 8.50V thump output, capturing definition and attack. The LJX (bridge position) sits at 4.05 KHz with 2.00V string and 8.00V thump output, anchoring the low end with articulate response. Both maintain low noise floors and identical 2.00 Kohm output impedance for a transparent signal path.
What's included in the box, and do I need to solder anything?
The set includes both pickups, an active VLPF tone control, two 25K volume potentiometers, one 25K active tone pot, battery bus, stereo output jack, pickup and connection cables, output and battery cables, and a complete solderless wiring harness. No soldering required—everything is plug-and-play.
What genres and playing styles is this set best suited for?
The PJX excels in studio sessions, gigging, modern jazz, funk, and progressive music where articulate attack, cut-through clarity, and tight low end are essential. It's not ideally voiced for traditional jazz or folk styles that favor warmer, more vintage tone.
How does the active tone control work?
The included active VLPF (very low-pass filter) tone control allows you to roll off high frequencies with surgical precision, letting you shape brightness and presence without losing definition across the frequency spectrum.
What skill level do I need to install this pickup set?
The solderless wiring harness makes installation straightforward for experienced players and technicians; intermediate to advanced players comfortable with bass electronics should have no trouble with the plug-and-play integration.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $15 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.