EMG PJ HZ Passive Bass Pickup Set in Black (Poles)
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2551
Description
EMG PJ HZ Passive Bass Pickup Set in Black (Poles)
The EMG PJ HZ passive pickup set captures the classic P and J bass voice with a balanced, articulate character that translates across studio sessions and live recording. Built with Alnico 5 magnets and fully shielded construction, these pickups integrate seamlessly into existing bass rigs or new builds. The included electronics package—potentiometers, output jack, and wiring harness—enables fast integration into your recording chain for experienced technicians and luthiers.
Tonal Character & Electrical Performance
The P-HZ core delivers 6.23 Henries inductance and 11.35 kΩ DC resistance with dual resonant peaks at 2.47 kHz and 3.4 kHz, producing the focused low-mid punch that sits tight in the mix on P-style recordings. The LJ-HZ (Long) uses a laminated steel core with 2.74 Henries inductance and 7.7 kΩ DC resistance, tuned for articulate highs and defined string separation that cuts through dense arrangements. Together, these pickups deliver traditional passive bass tone without onboard preamp coloration, preserving the natural dynamics of your playing for accurate capture in the studio.
Design & Build Quality
Full shielding throughout eliminates hum and RF interference, essential for passive systems in controlled studio environments and live recording setups. The 5-wire quik-connect output on each pickup allows flexible routing during mic placement and troubleshooting to dial in your preferred tone. Steel core construction in the J pickup ensures consistent response across the frequency spectrum, while mounting hardware and bridge ground connector are included for complete setup and optimal recording headroom.
Key Features
- P-HZ and LJ-HZ passive pickup pair with Alnico 5 magnets
- P-HZ inductance: 6.23 Henries; DC resistance: 11.35 kΩ
- LJ-HZ inductance: 2.74 Henries; DC resistance: 7.7 kΩ
- Dual resonant peaks at 2.47 kHz / 3.4 kHz (P-HZ) and 2.4 kHz / 3.2 kHz (LJ-HZ)
- Impedance at resonance: 96.60 kΩ (P-HZ) and 41.29 kΩ (LJ-HZ)
- Fully shielded construction minimizes electromagnetic noise
- Laminated steel core in J pickup for consistent response
- 5-wire quik-connect output on each pickup
- Includes 2× 250K volume pots, 1× 250K tone pot, mono output jack, and bridge ground connector
- Complete mounting hardware: 8 pairs mounting screws, pickup cables, connect cables, and output cable
This passive set preserves the transparency and dynamic range of traditional bass pickup design while offering the flexibility of EMG's quality construction and included electronics package for reliable studio performance.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG PJ HZ passive set captures transparent, dynamic bass tone with dual resonant peaks that sit well in a mix—the P-HZ adds focused low-mid definition, the LJ-HZ provides articulate presence and string clarity. Full shielding eliminates noise in controlled recording environments, and the included electronics and complete wiring harness simplify integration into a session bass or custom build. Ideal for producers and engineers tracking bass that needs to punch through without coloration or compromise.
Who This Is For
| Best suited for | Bass Guitar Builds, Studio Sessions, Live Performance, Funk, Jazz |
|---|---|
| Tonal character | Balanced, articulate, focused low-mid punch, defined string separation, transparent |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's included in this pickup set?
The set includes the P-HZ and LJ-HZ passive pickups, two 250K volume potentiometers, one 250K tone potentiometer, a mono output jack, bridge ground connector, mounting screws (8 pairs), pickup cables, connect cables, and an output cable. Everything needed for a complete installation is in the box.
What tone should I expect?
The P-HZ delivers focused low-mid punch with a balanced, articulate character; the LJ-HZ provides defined string separation and articulate highs. Together they produce traditional passive bass tone with transparency and dynamic range, without coloration from an onboard preamp. These pickups work well across funk, jazz, and studio genres.
Will these pickups work with my current bass electronics?
Yes, the 5-wire quik-connect outputs on each pickup allow flexible routing into existing bass electronics or new builds. The included potentiometers and wiring are designed for straightforward integration, though experienced technicians or luthiers are recommended for installation.
How does the shielding help in live or studio use?
Full shielding throughout both pickups eliminates hum and RF interference, which is critical for passive systems in venues and recording studios. This keeps your bass signal clean and noise-free in any environment.
What magnets and core materials are used?
Both pickups use Alnico 5 magnets for classic tone. The P-HZ has a traditional core delivering 6.23 Henries inductance; the LJ-HZ uses a laminated steel core (2.74 Henries) for consistent frequency response across the spectrum.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $13 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.