EMG P6 6-String Active Bass Pickup in Ivory
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG1214
Description
EMG P6 6-String Active Bass Pickup in Ivory
The EMG P6 is a high-output active pickup engineered to deliver clarity and punch across all six strings in recording and mixing scenarios. Its split-coil design produces balanced response with minimal noise, critical for capturing clean bass tracks without hum interference. The solderless quick-connector system enables rapid integration into your session setup without rewiring, and the ivory finish integrates seamlessly into any studio environment.
Active Electronics & Noise Performance
Powered by a single 9V battery, this active pickup achieves exceptional signal-to-noise ratio with -106 dBV output noise at 60 Hz—essential for studio tracking where hum artifacts compromise mix clarity. The battery provides approximately 3000 hours of runtime, and the pickup can operate at supply voltages up to 27V DC, making it compatible with various preamp and interface configurations in your signal chain.
Output & Frequency Response for Tracking
The P6 produces 2.00V output in standard playing mode and 4.50V in thump mode, providing dynamic headroom to capture articulate bass lines and aggressive attacks without clipping. Its 3.20 kHz resonant frequency and 10 kΩ output impedance are optimized for modern recording chains, ensuring tight, defined lows that translate accurately to the mix without muddiness.
Key Features
- Active single-coil, split-coil design with ceramic magnet
- Maximum string spacing of 3 inches (76mm) for precise 6-string alignment
- Output voltage: 2.00V (finger/thumb mode) / 4.50V (thump mode)
- Output noise: -106 dBV @ 60 Hz
- Output impedance: 10 kΩ
- Quick-Connect solderless installation system
- 9V battery operation; 3000-hour battery life
- Current draw: 80 microamps @ 9V
- Maximum supply voltage: 27V DC
- Includes Quik-Connect cable, prewired volume/tone potentiometer set, output jack, battery clip set, and adjustment screws
- Ivory cosmetic finish
The EMG P6 combines low-impedance active electronics with plug-and-play installation, making it an efficient upgrade for tracking sessions where sonic clarity and system reliability matter.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG P6 is an active 6-string bass pickup engineered for studio clarity and punch, delivering 2.00V in standard mode and 4.50V in thump mode for dynamic headroom in the mix. Its low-noise active electronics (-106 dBV @ 60 Hz) and tight, defined low-end response sit well in modern recordings without hum or muddiness. Choose it to capture articulate bass lines and aggressive tonal attacks with minimal post-processing cleanup.
Who This Is For
Great for
- ✓ funk
- ✓ modern bass
- ✓ studio sessions
- ✓ live performance
Not the best pick for
- – traditional jazz
- – upright bass applications
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
Does this pickup require soldering to install?
No. The EMG P6 uses a solderless quick-connect system, so installation requires no modifications to existing wiring. A prewired volume/tone potentiometer set, output jack, battery clip, and adjustment screws are included.
How long does the 9V battery last?
The battery provides approximately 3000 hours of runtime. Current draw is minimal at 80 microamps at 9V, so typical use between charges spans several months.
What tone should I expect from the P6?
Expect high output, tight low end, and articulate mids with minimal noise. The 3.20 kHz resonant frequency and 10 kΩ output impedance are optimized for modern bass amp topologies, delivering punchy clarity suitable for funk, modern bass, studio sessions, and live performance.
Can I use this pickup with different preamp configurations?
Yes. The P6 can operate at supply voltages up to 27V DC, making it adaptable to various preamp setups beyond the included 9V battery operation.
What string spacing does this pickup support?
The P6 is designed for a maximum string spacing of 3 inches (76mm), ensuring precise alignment and balanced response across all six strings.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.