EMG JVX Active Bass Pickup Set in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3237
Description
EMG JVX Active Bass Pickup Set in Black
The EMG JVX captures a punchy, articulate tone with tight low-end response and clear midrange definition, tracking transients with precision in the mix. Built for 4-string Jazz Bass configurations, these pickups deliver quick attack and controlled output that sits cleanly alongside drums and vocals without muddiness. The exposed pole pieces and Alnico 5 magnets produce the bright, focused character essential for recording bass parts that anchor a session while maintaining definition in the low-mid range.
Design & Specifications
This set comprises a neck pickup measuring 91.19mm (3.59") and a bridge pickup measuring 93.99mm (3.70"), both 18.54mm (0.73") wide. The single-coil, Jazz Bass configuration fits standard 4-string bass routing and maintains the classic spacing and voicing of the format. The active topology provides consistent output level across sessions and excellent noise rejection—critical for clean DI recording chains and direct monitoring without artifacts.
Installation & Electronics
The Quik-Connect header and mating cable enable solderless installation, eliminating the need to solder directly to the pickups and allowing quick swaps during recording or setup. The included pre-wired volume and tone control circuit uses 25K potentiometers with an active VLPF (very low pass filter) tone control, powered by a standard 9V battery with included battery clip and output jack. This complete system ships ready to integrate into your bass with minimal modification, speeding up session prep.
Key Features
- Neck Pickup: 91.19mm (3.59") length × 18.54mm (0.73") width
- Bridge Pickup: 93.99mm (3.70") length × 18.54mm (0.73") width
- Alnico 5 magnet construction
- Single-coil design in Jazz Bass configuration for 4-string basses
- Exposed pole pieces
- Active pickup system
- Requires 9V battery
- Quik-Connect header with mating cable for solderless installation
- 25K active volume potentiometer
- 25K active VLPF tone potentiometer
- Pre-wired with battery clip and output jack included
The JVX set combines traditional Jazz Bass geometry with modern active electronics and quick-connect convenience, making it an efficient retrofit for studios and home producers seeking enhanced clarity, output consistency, and reliable recording-session performance.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JVX set captures bright, focused bass tone with active noise rejection and consistent output ideal for recording jazz, funk, and studio sessions where clarity in the midrange and tight low-end definition keep the bass articulate in a dense mix. The pre-wired active circuit with VLPF tone control gives you studio-ready plug-and-play electronics without soldering, plus the Quik-Connect header makes swapping into your bass quick and non-destructive. Choose this for home or professional recording when you want a modern active character that sits cleanly alongside drums and keyboards.
Who This Is For
Great for
- ✓ Jazz
- ✓ Funk
- ✓ Studio Sessions
- ✓ Gigging
Not the best pick for
- – Drop Tunings
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What bass models is this set compatible with?
The JVX is designed for 4-string Jazz Bass configurations and fits standard Jazz Bass routing. The neck pickup measures 91.19mm and the bridge pickup measures 93.99mm, both 18.54mm wide, maintaining classic Jazz Bass spacing and geometry.
Do I need to solder these pickups in?
No. The Quik-Connect header and mating cable enable solderless installation, and the set includes a pre-wired volume and tone circuit with battery clip and output jack ready to connect—minimal modification required.
What tone should I expect from active pickups?
The JVX delivers a punchy, articulate sound with tight low end, clear midrange, and bright character typical of active EMG designs. This translates to quick transient response and controlled output that cuts through a mix without passive coloration.
What power does this require?
The active electronics are powered by a standard 9V battery, which is included with the battery clip. The 25K active potentiometers and VLPF tone control draw minimal current for extended playing sessions.
Is this suitable for drop tunings?
The JVX is optimized for standard tuning and jazz/funk applications; it is not recommended for drop tunings, which may compromise the tight low-end response and articulate character these pickups are engineered to deliver.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $14 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.