EMG JV Active Bass Pickup Set in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5427
Description
EMG JV Active Bass Pickup Set in Red
The EMG JV/SET-R captures the punchy, articulate character of vintage J-bass voicing with modern active electronics reliability. This red-finished set combines classic single-coil character with low noise performance, ensuring clean recordings across a range of studio applications. The matched neck and bridge configuration delivers consistent tonal response across your frequency spectrum and playing dynamics.
Recording Tone & Signal Character
Built around Alnico 5 magnets and tuned to a 3.20 kHz resonant frequency, these pickups deliver defined midrange and articulate transient capture for precise tracking. The active circuit achieves exceptionally low noise at -99 dB output noise (60 Hz) while maintaining responsive output—1.50V string output and 4.50V thump output provide both clarity and punch without compromising headroom on your interface or preamp.
Power & Specifications
The active circuit operates efficiently at 80 microamps @ 9V, delivering an impressive 3000-hour battery life on a single charge. Maximum supply voltage tolerance of 27V DC accommodates both standard alkaline and lithium batteries, ensuring consistent performance across extended recording sessions. 10 Kohm output impedance provides clean coupling to any preamp, mixing interface, or direct recording chain.
Key Features
- Alnico 5 magnet construction
- 3.20 kHz resonant frequency
- 1.50V output voltage (string)
- 4.50V output voltage (thump)
- -99 dB output noise (60 Hz)
- 10 Kohm output impedance
- 80 microamps current draw @ 9V
- 3000-hour battery life
- 27V DC maximum supply voltage
- Neck pickup: 91.19mm × 18.54mm; Bridge pickup: 93.99mm × 18.54mm
- Includes 2× 25K volume pots, 1× 25K tone pot, stereo output jack, battery bus, mounting hardware, and all necessary cables
- Gold logo finish
This complete active system ships with all supporting electronics and connectivity hardware, enabling quick integration into your recording bass or straightforward installation by experienced technicians.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JV Active Bass Pickup Set captures punchy, articulate midrange and clean transient response ideal for laying down tight bass tracks in funk, jazz, and session work. Its -99 dB output noise floor and 1.50V/4.50V dual-voltage design let you record with clarity and dynamic range, sitting perfectly in a mix without noise coloration. This active system includes all pots, switching, and cables, making it a complete, ready-to-integrate solution for retrofitting your recording bass.
Who This Is For
| Best suited for | Studio Sessions, Touring, Funk, Jazz |
|---|---|
| Tonal character | Punchy, articulate, defined midrange, low noise, vintage j-bass voicing |
| Less specialized for | Thrash Metal, Drop Tunings (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What bass styles and genres is this pickup set best suited for?
The EMG JV excels in studio sessions, touring, funk, and jazz contexts where articulate midrange and punchy transient response are priorities. It is not recommended for thrash metal or drop-tuning applications, where heavier magnetic output and lower midrange emphasis are typically preferred.
How long does the battery last, and what batteries does it support?
The active circuit delivers 3000 hours of battery life on a single 9V charge and supports both standard alkaline and lithium batteries thanks to its 27V DC maximum supply voltage tolerance. Current draw is just 80 microamps at 9V, making it extremely efficient in the field or studio.
What comes in the box and what level of installation difficulty should I expect?
The set includes both neck and bridge pickups, 2× 25K volume pots, 1× 25K tone pot, stereo output jack, battery bus, mounting hardware, and all necessary cables. Installation is straightforward for experienced technicians or luthiers; you will need basic soldering skills and familiarity with bass wiring.
How does the output noise compare to other active J-bass pickups?
The EMG JV achieves -99 dB output noise at 60 Hz, delivering exceptionally clean signal coupled with 1.50V string output and 4.50V thump output for both clarity and punch. This low-noise performance is a hallmark of modern active electronics and ensures minimal hum in both live and studio environments.
What are the physical dimensions, and will these fit my bass?
Neck pickup measures 91.19mm × 18.54mm; bridge pickup measures 93.99mm × 18.54mm. Standard J-bass routing accommodates these dimensions; confirm your bass body cavity matches before ordering, as routing modifications may be necessary for some non-standard instruments.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $14 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.