EMG JCS Active Bass Pickup Set in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4993
Description
EMG JCS Active Bass Pickup Set in White
The EMG JCS delivers the articulate, punchy response that defines modern active bass tone in the studio. This set pairs a focused neck pickup with a powerful bridge pickup, engineered for clarity across the frequency spectrum and minimal noise—essential for tracking clean, detailed bass performances and maintaining definition in dense mixes. Built for producers and engineers who demand precision and consistency from their signal chain.
Tone & Electronics
The JCS design balances articulation with low-end authority, with a 3.20 kHz resonant frequency that emphasizes note definition and sits naturally in a mix without muddiness. Bridge output reaches 4.50V for aggressive tonal shaping and headroom during recording, while the neck pickup delivers 1.00V for warm, controlled fundamentals that anchor your low end. The active circuit operates on a single 9-Volt battery with exceptional efficiency—3000 hours battery life and only 80 microamps current draw mean extended tracking sessions between changes. Output noise of -99 dB at 60 Hz ensures virtually silent operation, critical for sensitive multitrack recording and capturing pristine DI tracks.
Installation & Compatibility
The solderless install system streamlines setup with pre-assembled controls and integrated routing, getting your instrument production-ready without complex wiring. Neck and bridge pickups measure 91.19mm × 18.54mm and 93.99mm × 18.54mm respectively, fitting standard 4-string bass cavities, with a maximum string width recommendation of 69.2mm (2.725"). The kit includes two 25k volume controls, one 25k tone control, battery bus, stereo output jack, mounting hardware, and connecting cables—everything needed for a clean installation and immediate recording session use.
Key Features
- Resonant Frequency: 3.20 kHz for focused midrange articulation
- Bridge Pickup Output: 4.50V for dynamic tonal range
- Neck Pickup Output: 1.00V for warm, controlled response
- Output Noise: -99 dB at 60 Hz for silent operation
- Active operation powered by single 9-Volt battery
- Battery Life: 3000 hours at 80 microamps draw
- Output Impedance: 10 kΩ
- Maximum Supply Voltage: 27V DC for headroom
- Ceramic and steel magnet construction
- Neck Pickup: 91.19mm (3.59") × 18.54mm (0.73")
- Bridge Pickup: 93.99mm (3.70") × 18.54mm (0.73")
- Solderless install system with integrated controls and wiring harness
- Maximum recommended string width: 69.2mm (2.725")
The EMG JCS in white combines studio-grade noise performance with straightforward installation, delivering the precision and output consistency required for professional tracking and mixing workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG JCS delivers studio-grade noise control and consistent high output in a ready-to-install active pickup set, ideal for producers and engineers working with funk, modern bass, and session work where clarity and low-end punch matter. The 3.20 kHz resonant peak keeps the midrange focused and articulate in the mix, while -99 dB output noise ensures clean recording without hum—even at sensitivity settings needed for detailed tracking. The included solderless harness, dual volume and tone controls, and 3000-hour battery life mean dependable, repeatable sessions with minimal maintenance.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Live Performance
- ✓ Funk
Not the best pick for
- – Folk
- – Jazz
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What does the solderless install system include?
The kit includes two 25k volume controls, one 25k tone control, battery bus, stereo output jack, mounting hardware, and connecting cables—everything needed for installation without soldering. The pre-assembled controls and integrated routing streamline setup.
How long does the 9V battery last?
The active circuit achieves 3000 hours of battery life at 80 microamps current draw, meaning extended play sessions between battery changes.
Will these pickups work in my bass?
The neck pickup is 91.19mm × 18.54mm and the bridge is 93.99mm × 18.54mm, fitting standard 4-string bass cavities with a maximum recommended string width of 69.2mm (2.725 inches). Check your bass cavity dimensions against these specs.
Why is the output noise spec important?
An output noise rating of -99 dB at 60 Hz means virtually silent operation, critical for sensitive recording environments and low-volume work where hum and hiss would otherwise color your tone.
How do the neck and bridge pickups differ in output?
The bridge pickup delivers 4.50V for aggressive, dynamic tonal shaping, while the neck pickup outputs 1.00V for warm, controlled fundamentals. This asymmetry gives you clarity on both positions while maintaining articulation across the frequency spectrum.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $14 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.