EMG HA Active Single Coil Pickup in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5486
Description
EMG HA Active Single Coil Pickup in Chrome
The EMG HA is a modern active single-coil design that delivers articulate, controlled output without sacrificing the brightness and definition inherent to single-coil topology. The chrome finish provides both visual distinction and corrosion resistance. This pickup excels in studio tracking and mixing applications where studio-grade clarity and ultra-low noise are essential in a compact, battery-powered format.
Recording Characteristics & Noise Performance
Built on Alnico magnets with a 4.05 kHz resonant frequency, the HA produces a focused midrange character that sits well in dense mixes and captures defined articulation with reduced hum. The −101 dBV noise floor at 60 Hz and 10 kΩ output impedance ensure minimal noise interference—critical for multi-tracking sessions and layered productions where noise becomes audible across takes.
Session Power & Practical Setup
The 9V battery system runs at only 80 µA, yielding 3000 hours of battery life—roughly four months of continuous operation without power concerns during extended studio sessions. Solderless installation with included 25k volume and tone potentiometers, battery bus, cables, and mounting hardware accelerates setup; the pickup also tolerates up to 27V DC for users running higher-voltage rigs or interface chains.
Key Features
- Alnico magnet construction
- 4.05 kHz resonant frequency
- −101 dBV output noise at 60 Hz
- 10 kΩ output impedance
- 9V battery power at 80 µA draw
- 3000-hour battery life
- Maximum 27V DC supply voltage rating
- Solderless installation system
- Includes 25k volume and 25k tone potentiometers
- Stereo output jack and two-pickup in/out bus
- Complete cable and connector set included
- Chrome finish
The HA balances the tonal openness of single-coil design with the noise immunity and output control of active electronics, making it an efficient capture tool for producers and engineers demanding professional audio quality in a conventional single-coil format.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG HA is an active single-coil pickup engineered for studio clarity and minimal electrical noise, ideal for recording sessions where articulate definition and focused midrange matter. Its −101 dBV noise floor and controlled output integrate cleanly into dense mixes, and the included solderless wiring kit accelerates installation so you can focus on tracking. Alnico construction and a 4.05 kHz resonant peak deliver the tonal character single-coils are known for without hum or unwanted coloration.
Who This Is For
| Best suited for | Studio Sessions, Home Recording, Live Performance, Extended Range |
|---|---|
| Tonal character | Articulate, bright, focused midrange, low noise, controlled output |
| Less specialized for | Vintage Tone Purists, Battery-Free Setups (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Does the EMG HA require a battery, and how long does it last?
Yes, the HA runs on a 9V battery at only 80 µA draw, yielding approximately 3000 hours of battery life—roughly four months of continuous play. The battery system is included with the pickup.
Is this pickup easy to install?
Yes. The EMG HA uses a solderless installation system and includes 25k volume and tone potentiometers, battery bus, all cables, connectors, and mounting hardware—no soldering required.
What makes the EMG HA good for noisy environments?
The HA delivers a −101 dBV noise floor at 60 Hz and uses active Alnico electronics to reject hum and electrical interference. This makes it reliable for live stages and studios with high electromagnetic noise.
How does the EMG HA compare to other active single-coils?
The HA balances single-coil brightness and articulation with the hum immunity and output control of active design. Its 4.05 kHz resonant frequency produces a focused midrange suited to defined articulation, distinguishing it from models prioritizing vintage tone or maximum output.
Can I use the EMG HA in a higher-voltage setup?
Yes, the HA is rated for up to 27V DC supply voltage, so it will work in rigs running higher-voltage systems.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.