EMG H4A Passive Humbucker Pickup in Red
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5598
Description
EMG H4A Passive Humbucker Pickup in Red
The EMG H4A delivers a warm, articulate passive response that sits between vintage character and modern clarity. Built with Alnico V bar magnets and fully shielded vintage wound coils, this pickup offers a balanced tonal palette for recording sessions demanding organic harmonic complexity without active electronics. The short shaft design integrates seamlessly into standard humbucker routes for quick swap-outs during tracking or mic testing.
Electromagnetic Performance for Recording
A DC resistance of 13.65 kΩ and inductance of 8 H establish a resonant frequency of 1.6 kHz (measured with typical 500K potentiometers and 20-foot cable), yielding an impedance at resonance of 80.2 kΩ. This signature curve preserves midrange definition while controlling high-end harshness, enabling the H4A to track cleanly through a wide range of amp tones and mixing contexts. Pick dynamics and fingerstyle playing both translate with clarity through the recording chain.
Construction & Studio Installation
The dual-coil humbucker configuration pairs Alnico V magnets with fully shielded windings to minimize noise without sacrificing output or sensitivity—critical for low-noise tracking sessions and mic-heavy recording environments. Setup is direct: the pickup ships with EMG's 5-wire Quik-Connect cable system and mounting screws, allowing swift installation, testing, and reconfiguration between takes or session variations without soldering.
Key Features
- Alnico V bar magnets for warm, harmonic-rich tone
- 13.65 kΩ DC resistance
- 8 H inductance
- 1.6 kHz resonant frequency (500K/20' cable configuration)
- 80.2 kΩ impedance at resonance
- Dual-coil humbucker configuration
- Fully shielded vintage wound coils
- 5-wire Quik-Connect cable system
- Short shaft, standard humbucker mounting
- Includes mounting screws
- Passive design—no active circuitry required
- Red finish
The H4A combines passive tonal authenticity with modern shielding and connectivity, making it an effective choice for home studios and production rigs seeking reliable, noise-free passive tone without the power draw and complexity of active systems.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The H4A is a passive humbucker that captures warm, midrange-forward tone with balanced harmonic detail and controlled presence peak, making it ideal for tracking blues, rock, and jazz with both pick and finger technique. Its 1.6 kHz resonant frequency sits well in studio mixes without muddying low-end or overshooting high-mids, and the fully shielded design keeps electrical noise minimal during recording sessions. Install it into any standard humbucker route and start tracking with no soldering or active power management required.
Who This Is For
| Best suited for | Blues, Rock, Jazz, Studio Sessions |
|---|---|
| Tonal character | Warm, articulate, midrange definition, harmonic-rich, controlled high-end |
| Less specialized for | Djent, Thrash Metal (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced / Professional |
Frequently Asked Questions
What genres does the H4A work best for?
The H4A excels in blues, rock, jazz, and studio sessions. Its warm, articulate response and controlled high-end make it less suited for djent or thrash metal, where higher output and sharper attack are typical demands.
Do I need to solder this pickup to install it?
No. The H4A ships with EMG's 5-wire Quik-Connect cable system, so installation is solderless and fully reversible. Mounting screws are included for standard humbucker routes.
Is this pickup active or passive?
This is a passive design with no active circuitry. It uses Alnico V magnets and fully shielded vintage wound coils to deliver tone without requiring batteries or onboard preamps.
How does the H4A compare to other humbuckers in its class?
The H4A occupies a middle ground between vintage character and modern clarity, with a 13.65 kΩ DC resistance and 8 H inductance that yield a 1.6 kHz resonant frequency. This sits it tonally near the Seymour Duncan 59 and DiMarzio Super Distortion, but with a more controlled high-end and stronger midrange definition.
Will the short shaft design fit my guitar?
Yes, the short shaft is designed for standard humbucker routes found on most electric guitars. Mounting screws are provided to secure it in place.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.