EMG H4A Passive Humbucker Pickup in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4491
Description
EMG H4A Passive Humbucker Pickup in Brushed Chrome
The EMG H4A is a fully passive humbucker designed for recording and tracking sessions where classic tonal character and electromagnetic transparency matter. Its vintage-wound construction and Alnico V magnets deliver articulate mids and controlled highs, making it a reliable bridge-position solution that captures natural harmonic detail across clean, overdriven, and saturated sources. The brushed chrome finish integrates cleanly into most instrument aesthetics while the solderless quick-connect wiring streamlines studio setup and eliminates installation complexity.
Recording & Electrical Characteristics
With a DC resistance of 13.65 kΩ and 8 Henries inductance, this pickup balances clarity and warmth across its dual resonant frequencies of 1600 Hz and 2875 Hz—a frequency response curve that sits well in dense mixes without requiring excessive EQ compensation. The Alnico V bar magnets paired with fully shielded vintage wound coils suppress unwanted noise and electromagnetic interference, preserving natural harmonic response through mic'd amp cabinets or direct recording chains, whether tracking clean articulation or driven textures.
Session Setup & Compatibility
Quick-connect solderless architecture means no soldering required during session prep—the 5-wire output terminates in a standard connector that eliminates guesswork during instrument changeover or tracking runs. Mounting screws are included, and the covered cap design protects the coils from dust and accidental contact during setup and teardown.
Key Features
- Passive humbucker configuration for bridge position
- Vintage wound coils with Alnico V bar magnets
- Fully shielded construction for minimal noise
- DC Resistance: 13.65 kΩ
- Inductance: 8 Henries
- Dual resonant frequencies: 1600 Hz and 2875 Hz
- 5-wire quick-connect solderless output
- Brushed chrome metal finish
- Covered cap design
- Includes 5-wire Quik-Connect cable and mounting screws
- 6-string configuration
- 4 wire plus shield conductors
The H4A delivers dependable passive performance in a straightforward format—ideal for producers prioritizing transparent capture, tonal authenticity, and proven electromagnetic design in a session-ready package.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H4A is a straightforward passive humbucker engineered to sit naturally in a mix with articulate mids, controlled highs, and warm harmonic response—perfect for capturing authentic blues, rock, and jazz tones in the studio. Its 13.65 kΩ DC resistance and dual resonant frequencies (1600 Hz and 2875 Hz) balance clarity with depth, making it versatile for both clean session work and driven recording takes. Solderless quick-connect architecture means fast bridge-position installation without soldering, letting you focus on tracking instead of wiring.
Who This Is For
| Best suited for | Blues, Rock, Hard Rock, Jazz |
|---|---|
| Tonal character | Articulate mids, controlled highs, warm clarity, natural harmonic response, minimal noise |
| Less specialized for | Metal, Djent (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced / Professional |
Frequently Asked Questions
Is this pickup active or passive, and do I need a battery?
The H4A is fully passive—no active electronics, no battery required. It uses Alnico V magnets and a vintage-wound coil design to deliver its tone without external power.
What genres does this pickup work best for?
The H4A excels in blues, rock, hard rock, and jazz applications. Its articulate mids and warm clarity suit players prioritizing classic tonal character over extreme gain or metal voicings.
Do I need to solder this pickup, or can I install it myself?
No soldering required. The pickup uses solderless quick-connect wiring with a standard 5-wire connector that terminates in a simple plug—mounting screws and cable are included, making bridge-position installation straightforward.
Will this pickup fit my guitar, and what position is it designed for?
The H4A is engineered for bridge-position applications in 6-string guitars and includes standard mounting screws. Confirm your guitar's bridge pickup cavity dimensions match standard humbucker spacing before purchase.
How does the shielded construction affect noise and tone?
Full shielding suppresses unwanted noise and hum while the Alnico V magnets and vintage-wound coils preserve natural harmonic response, delivering clarity and warmth without compromising electromagnetic performance.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.