EMG H4 Passive Humbucker Pickup in White
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5706
Description
EMG H4 Passive Humbucker Pickup in White
The EMG H4 is a fully shielded passive humbucker designed to capture articulate, balanced tone in the studio without active circuitry or battery dependencies. Its ceramic bar magnet design and over-wound coils deliver clarity across the frequency spectrum while maintaining the noise rejection essential for clean recording takes. This white finish variant integrates seamlessly into any tracking setup, from modern to classic guitar rigs.
Electrical Performance
A DC resistance of 13.65 kOhm and inductance of 7.37 Henries position the H4 in the midrange of passive humbucker output—enough definition for lead layers and rhythm clarity in the mix without the mud of over-wound designs. The resonant frequency of 1.72 kHz (with standard 500K pots and 20-foot cable) keeps the midrange articulate during recording, while impedance at resonance reaches 78.70 kOhm, ensuring stable interface with your preamp and recording chain.
Studio Integration & Wiring Options
The pickup ships with a 5-wire cable that enables series/parallel switching and single/dual-coil voicing options, letting you dial in tonal character during tracking or overdubs without hardware changes. Bar pole pieces suit both Tune-o-matic and Floyd Rose bridge configurations, and the humbucker-standard footprint makes it a direct drop-in replacement in any guitar built for dual-coil pickups. Its fully shielded, ceramic/steel magnet construction eliminates hum—critical for studio work—while preserving the organic response of a true passive design.
Key Features
- Over-wound coils with ceramic/steel bar magnets, fully shielded for noise rejection
- DC Resistance: 13.65 kOhm
- Inductance: 7.37 Henries
- Resonant Frequency: 1.72 kHz (with 500K pots and 20-foot cable)
- Impedance at Resonance: 78.70 kOhm (with 500K load)
- 5-wire cable with series/parallel switching capability
- Bar pole piece design compatible with Tune-o-matic and Floyd Rose bridges
- Direct replacement for standard humbucker-size cavities
- Passive design—no batteries or external power required
- White finish option
The H4 delivers straightforward passive performance with EMG's commitment to shielding and precision winding, making it a dependable retrofit for session guitars needing balanced tone and hum-free operation in the studio.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H4 is a passive humbucker engineered for clear, balanced recordings without the mud of over-driven designs or the noise floor of active pickups. Its 13.65 kOhm DC resistance and 1.72 kHz resonant frequency keep the midrange articulate and sit well in a mix, while full shielding eliminates hum during tracking and overdubs. The 5-wire cable enables series/parallel switching directly in your signal chain, giving you tonal options to capture different textures in a single session.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Gigging
- ✓ Live Performance
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
Do I need a battery or power supply to run this pickup?
No. The H4 is a fully passive design—it requires no batteries, external power, or active circuitry. Simply wire it into your guitar's volume and tone controls and play.
Will this pickup fit my guitar?
The H4 has a standard humbucker footprint and works with any guitar built for dual-coil pickups. Bar pole pieces are compatible with both Tune-o-matic and Floyd Rose bridge configurations, making it a direct drop-in replacement.
What does the 5-wire cable do?
The included 5-wire cable enables series/parallel switching and single/dual-coil voicing options, letting you change the tonal character without rewiring the pickup itself.
How does the H4 compare to active EMG pickups like the 81?
The H4 is passive and needs no battery, while the EMG 81 is active and requires external power. The H4 preserves a more organic passive response and is better suited to players who want clean tone without active compression or coloration.
Is this pickup suitable for lead work and rhythm playing?
Yes. With a DC resistance of 13.65 kOhm, the H4 sits in the midrange of passive humbucker output, delivering enough presence for lead definition and rhythm clarity without excessive mud or noise.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.