EMG H2A-N Passive Humbucker Pickup in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG3632
Description
EMG H2A-N Passive Humbucker Pickup in Chrome
The EMG H2A-N is a vintage-voiced passive humbucker designed to capture articulate, detailed response in recording and mix sessions without active electronics coloration. This Alnico V-magnet design delivers clarity and harmonic complexity across the frequency spectrum, making it a straightforward retrofit for any guitar requiring a standard humbucking footprint.
Electrical Performance & Recording Characteristics
A DC resistance of 8.40 kOhm and inductance of 4.90 Henries establish a balanced output characteristic suited to capturing both vintage-styled and contemporary source material. The dual resonant frequencies at 2.12 KHz and 3.82 KHz with 65.40 kOhm impedance at resonance create a naturally responsive midrange and controlled high-end presence that translates clearly to tape or DAW, while the Alnico V magnet type provides the magnetic saturation associated with warm, musical tone that sits well in dense mixes.
Studio Flexibility & Tonal Customization
The 5-wire cable enables series/parallel switching and multiple coil combinations, allowing extensive tonal customization during tracking or overdub sessions. Direct fit into standard humbucking-size cavities means quick instrument swaps in the studio, and the chrome finish maintains professional appearance across varied recording setups.
Key Features
- Magnet Type: Alnico V (A/S)
- DC Resistance: 8.40 kOhm
- Inductance: 4.90 Henries
- Pole Spread: 0.388" (9.85mm) — standard Tune-o-matic bridge compatibility
- Resonant Frequency (Primary): 2.12 KHz
- Resonant Frequency (Secondary): 3.82 KHz
- Impedance at Resonance: 65.40 kOhm
- Winding: Vintage wind with Alnico V magnets
- Connector: 5-wire cable for series/parallel and coil switching
- Compatibility: Direct replacement for standard humbucking-size pickups
- Finish: Chrome
- Dimensions: 2.75 x 2.38 x 6 inches
The H2A-N combines measured technical specifications with hands-on versatility, delivering passive tone without compromise across tracking, layering, and mixing workflows.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H2A-N is a passive Alnico V humbucker engineered for articulate, detailed response in the studio, with dual resonant frequencies that create natural midrange presence and warm, musical saturation. Its 5-wire switching capability and balanced output (8.40 kOhm DC resistance) make it a versatile retrofit for recording sessions across blues, rock, and jazz genres, letting you dial in tone without the noise floor of active pickups.
Who This Is For
Great for
- ✓ Blues
- ✓ Rock
- ✓ Jazz
- ✓ Studio Sessions
- ✓ Gigging
Not the best pick for
- – Metal
- – Djent
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What makes this different from active EMG pickups?
The H2A-N is entirely passive, using no battery or preamp—it relies on Alnico V magnets and vintage winding for its warm, harmonic tone. This keeps the noise floor lower and simplifies wiring compared to active EMG models, while maintaining that detailed articulation EMG is known for.
Will this fit my guitar?
Yes, if your guitar has a standard humbucking cavity and bridge (Tune-o-matic compatibility confirmed). The pickup is a direct mechanical and electrical replacement for any standard-sized humbucker; the 5-wire cable connects to your existing wiring harness.
Can I switch between different coil configurations?
Yes. The 5-wire cable supports series/parallel switching and multiple coil combinations, letting you shape tone beyond basic pickup selection—useful for dialing in different characters for different songs or studios.
Is this pickup suitable for metal or high-gain styles?
No, this pickup is voiced for blues, rock, jazz, and studio work. Its warm, controlled character and balanced output don't suit metal or djent genres, which typically demand higher output and more aggressive harmonic content.
What skill level do I need to install this?
Installation is straightforward for intermediate players and up. Standard humbucking routing and a soldering iron are all you need; the 5-wire cable gives you flexibility in wiring, though professional installation is always an option.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.