EMG H2A-N Long Shaft Passive Humbucker Pickup in Black
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6974
Description
EMG H2A-N Long Shaft Passive Humbucker Pickup in Black
The EMG H2A-N is a passive humbucker designed to capture articulate midrange clarity and controlled output without onboard preamps. Its compact footprint and straightforward design make it effective for tracking sessions, retrofitting existing instruments, or A/B testing against active systems, delivering balanced response across the frequency spectrum for clean recording chains.
Electrical Characteristics
This pickup measures 8.40 kOhm DC resistance with 4.90 Henries inductance, yielding a primary resonant frequency of 2.12 kHz and secondary peak at 3.82 kHz. The 65.40 kOhm impedance at resonance ensures clean signal transmission to your audio interface and preamps without the compression typical of higher-output designs, preserving note definition, sustain, and mix-friendly clarity in the studio.
Studio Setup & Integration
This model ships with EMG's Solderless Install System, eliminating the need for iron and solder and speeding up session prep. The package includes a 500k volume potentiometer, 500k tone potentiometer, and mono output jack, providing everything required for a complete drop-in wiring harness. Long shaft configuration accommodates deeper routing cavities found on many semi-hollow and offset body designs, enabling flexible instrument selection across sessions.
Key Features
- Alnico V magnet for warm, vintage-focused tone
- 8.40 kOhm DC resistance
- 4.90 Henries inductance
- Primary resonant frequency: 2.12 kHz
- Secondary resonant frequency: 3.82 kHz
- Impedance at resonance: 65.40 kOhm
- Long shaft design for deep routing cavities
- Includes solderless wiring harness with 500k volume pot
- Includes solderless wiring harness with 500k tone pot
- Includes mono output jack for direct connection
- Black finish
- Dimensions: 2.75 x 2.38 x 6 inches
The H2A-N captures passive clarity with minimal noise, ideal for recording sessions that demand articulation and transparency throughout the signal chain.
More Information
| Condition | New |
|---|---|
| Finish | Black |
Reviews
At a Glance
The EMG H2A-N is a passive humbucker that captures articulate, warm tones with a balanced frequency response perfect for recording blues, jazz, and rock. Its 8.40 kOhm resistance yields clean, defined sustain without the compression of higher-output pickups, sitting naturally in mixes without coloration. The solderless install system and included 500k potentiometers make it simple to drop into existing guitars or retrofit sessions, letting you focus on capturing great takes.
Who This Is For
| Best suited for | Blues, Jazz, Rock, Studio Sessions, Retrofit Installations |
|---|---|
| Tonal character | Articulate midrange, warm vintage-focused, controlled output, clean signal transmission, balanced frequency response |
| Less specialized for | Metal, Djent (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does the long-shaft design mean, and which guitars does it fit?
Long shaft means the pickup is taller and designed for deeper routing cavities found on semi-hollow and offset-body guitars. Standard Stratocaster and Telecaster bodies may require shorter shafts, so verify your guitar's cavity depth before ordering.
Is this pickup good for metal or high-output styles?
No. The H2A-N is engineered for articulate, vintage-focused tones in blues, jazz, and rock—not metal or djent. Its controlled 8.40 kOhm output prioritizes clarity and note definition over aggressive gain.
What's included in the box, and do I need a soldering iron?
The pickup ships with EMG's Solderless Install System, a 500k volume potentiometer, 500k tone potentiometer, and mono output jack. No soldering iron or additional wiring needed—everything plugs together.
How does this compare to active EMG pickups?
The H2A-N is fully passive with no onboard preamp, delivering cleaner signal transmission and less compression than active designs. You get direct connection to your amp with 65.40 kOhm impedance at resonance, preserving articulation and transparency in your signal chain.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
✨ For You
Based on what you've been looking at.