EMG H2-N Long Shaft Passive Humbucker Pickup in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG7145
Description
EMG H2-N Long Shaft Passive Humbucker Pickup in Chrome
The EMG H2-N is a passive ceramic humbucker engineered to capture articulate, balanced tone without the complications of active electronics. The long shaft design accommodates deeper guitar bodies and custom builds, while the chrome finish pairs seamlessly with vintage and modern recording setups alike.
Tone & Recording Character
This pickup combines a ceramic magnet with moderate DC resistance of 8.40 kOhm and an inductance of 4.53 Henries, yielding a response that sits between vintage warmth and modern clarity. The balanced output translates well through preamps and interfaces, with natural compression that responds to dynamic playing and sits neutrally in a mix without excessive midrange coloration.
Studio Integration & Setup
Single screw pole pieces enable individual string-level adjustment, allowing you to dial in pickup balance before tracking. The long shaft format fits guitars with recessed pickup cavities or custom routing, and the 500K pot recommendation ensures optimal impedance matching and high-frequency response in your signal chain for clean interface recording.
Key Features
- Passive ceramic humbucker — no active preamp required
- 8.40 kOhm DC resistance for balanced output
- 4.53 Henries inductance
- Single screw pole pieces for string-by-string adjustment
- Long shaft design for deep cavities and custom builds
- Chrome finish
- 500K recommended potentiometer value
- Made in the United States
The H2-N delivers reliable passive performance and tonal versatility in a thoughtfully finished package suited to producers building or upgrading recording instruments.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H2-N is a passive ceramic humbucker that captures articulate, balanced warmth with natural compression—ideal for recording sessions where dynamic response and mix-friendly output are priorities. Single screw pole pieces allow precise string-level adjustment during tracking, and the moderate 8.40 kOhm resistance pairs well with standard 500K pots for optimal high-frequency response in your signal chain. Choose this for home recording and custom builds where you need reliable passive performance without active preamp noise or complexity.
Who This Is For
| Best suited for | Studio Sessions, Custom Builds, Home Recording, Lead Work |
|---|---|
| Tonal character | Articulate, balanced warmth and clarity, natural compression, moderate output, dynamic response |
| Less specialized for | Drop Tunings, Extreme Metal (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does the long shaft design mean for my guitar?
The long shaft accommodates guitars with recessed pickup cavities or custom routing, making it ideal for deeper guitar bodies and custom builds. Standard short-shaft pickups won't fit these applications, so the long shaft format expands your options significantly.
Is this pickup passive or active, and what's the advantage?
The H2-N is fully passive—no active preamp or battery required. Passive pickups are simpler to install, quieter than active systems, and deliver natural dynamic response without the noise floor or power dependency of active electronics.
What genres or playing styles is this pickup best suited for?
The H2-N excels in studio sessions, lead work, and custom builds where articulate, balanced tone is valued. It's not engineered for drop tunings or extreme metal; the moderate output and natural compression favor clarity over maximum gain.
Can I adjust the pickup after installation?
Yes. Single screw pole pieces allow string-by-string adjustment, so you can fine-tune the output and tone of each string after the pickup is installed to match your playing style and guitar setup.
What potentiometer value should I use with this pickup?
EMG recommends a 500K potentiometer to ensure optimal impedance matching and high-frequency response. Using the correct pot value preserves the pickup's clarity and tonal balance in your signal chain.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.