EMG H2-N Long Shaft Passive Humbucker Pickup in Brushed Gold
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG7472
Description
EMG H2-N Long Shaft Passive Humbucker Pickup in Brushed Gold
The EMG H2-N is a passive neck-position humbucker engineered to capture warmth and clarity without the noise floor that limits traditional vintage designs. This brushed gold finish variant combines striking aesthetics with the voiced character EMG built into this model for transparent recording and mixing. The ceramic magnet construction and passive design function as a direct retrofit, delivering the natural dynamics and responsiveness required for nuanced neck-position tracking and blending in the studio.
Tone & Electronics
Ceramic magnets paired with passive circuitry produce a balanced tonal signature with defined articulation and natural sustain optimized for recording. The 8.4 kOhm DC resistance and 4.53 Henry inductance establish a response curve centered around 2225 Hz and 4000 Hz resonant frequencies, favoring mid-range presence that sits cleanly in a mix without excessive high-end breakup or low-end mud.
Design & Installation
The 5-wire quick-connect output simplifies wiring configurations and accommodates both series and parallel routing for session flexibility. Standard 0.388" pole piece spread ensures proper magnetic coupling across six strings on most instruments. Pairing with 500K potentiometers preserves the full frequency response this pickup is voiced to deliver in the recording chain.
Key Features
- Passive humbucker design—no batteries or active circuitry required
- Ceramic magnet construction for consistent output and tonal stability
- 8.4 kOhm DC resistance for balanced neck-position response
- 4.53 Henry inductance
- Dual resonant frequencies at 2225 Hz and 4000 Hz
- 5-wire quick-connect output for flexible wiring options
- 0.388" (9.85mm) standard pole piece spread
- Brushed gold finish
- Long shaft configuration
- Designed for 500K pot value circuits
- Neck position voicing
- Direct retrofit compatibility with standard humbucker routes
The H2-N excels in recording contexts where dynamic response and tonal transparency define neck-position tracking, particularly for producers and engineers transitioning from active systems or seeking an upgrade from lower-output passives.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H2-N is a passive neck-position humbucker engineered to sit transparently in a mix with warm tone, articulate mid-range presence, and low noise floor—no active circuitry or batteries required. Home recordists and engineers will appreciate how its ceramic magnets and dual resonant frequencies (centered at 2225 Hz and 4000 Hz) deliver natural dynamics and defined sustain that captures the nuance of clean and lightly driven tones in jazz, blues, and progressive sessions. Drop-in compatible with standard humbucker cavities and 500K circuits, it simplifies retrofit installs while preserving the frequency response needed for balanced, transparent neck-pickup recordings.
Who This Is For
| Best suited for | Studio Sessions, Home Recording, Jazz, Blues, Progressive |
|---|---|
| Tonal character | Warm, articulate, mid-range presence, natural dynamics, low noise floor |
| Less specialized for | Metal, Djent (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's the difference between the H2-N and traditional vintage humbuckers?
The H2-N uses passive ceramic magnets and is voiced around 2225 Hz and 4000 Hz resonant frequencies for mid-range presence and articulation without the hum or noise floor common in vintage designs. Its 8.4 kOhm DC resistance and 4.53 Henry inductance create a balanced response that favors clarity and natural sustain over excessive breakup or mud.
Will this pickup work in any humbucker route, and what else do I need to install it?
Yes, the H2-N fits any standard humbucker cavity with its 0.388-inch pole piece spread and long shaft configuration. It requires 500K potentiometers to deliver its full voiced response, and the 5-wire quick-connect output supports both series and parallel wiring, making retrofit straightforward.
Is this pickup suitable for metal or high-gain styles?
No; the H2-N is voiced for warm articulation and mid-range presence, making it best suited to jazz, blues, and progressive styles. It prioritizes dynamic response and tonal transparency over the aggression and thick compression metal and djent players typically need.
Do I need to use batteries or external power with this pickup?
No. The H2-N is completely passive—it uses ceramic magnets and passive circuitry, so no batteries, active preamps, or external power are required.
How does the brushed gold finish affect the tone?
The brushed gold finish is cosmetic only and does not affect tone or performance. It is paired with the same passive ceramic-magnet design and voicing as other H2-N variants.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.