EMG H1A-B Passive Humbucker Pickup in Gold
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5385
Description
EMG H1A-B Passive Humbucker Pickup in Gold
The EMG H1A-B is a passive humbucker engineered to capture articulate, balanced tone directly into your interface or console without requiring onboard preamp circuitry. Built with over-wound coils and Alnico V magnets, this pickup delivers clarity and definition across all frequencies—essential for tracking sessions where you need reliable, transparent signal capture and minimal noise floor.
Tone & Electrical Characteristics
A DC resistance of 13.65 kOhm and inductance of 7.80 Henries establish this pickup's sonic signature, yielding a resonant frequency of 1.65 KHz in series wiring or 3.00 KHz in parallel wiring—allowing you to shape your recorded tone from warm, full-bodied response to bright, articulate character depending on wiring configuration. The impedance at resonance of 80.80 kOhm (series) ensures clean, impedance-matched output into standard audio interfaces and mixing chains.
Design & Specifications
Measuring 2.75 x 2.38 x 6 inches, the H1A-B installs into any standard humbucking cavity and features 0.388" (9.85mm) pole piece spacing—standard for Tune-o-matic bridges. The fully shielded 5-wire Quik-Connect output minimizes RF noise and ground hum during recording, while the included EMG Quik-Connect Cable and Mounting Screws provide everything needed for direct replacement of existing humbucking pickups.
Key Features
- Magnet Type: Alnico/Steel (A/S) construction with Alnico V magnets
- Gold logo finish
- DC Resistance: 13.65 kOhm
- Inductance: 7.80 Henries
- Resonant Frequency: 1.65 KHz (series) / 3.00 KHz (parallel wiring)
- Impedance at Resonance: 80.80 kOhm (series configuration)
- Pole Piece Spacing: 0.388" (9.85mm) standard Tune-o-matic
- 5-wire Quik-Connect fully shielded output
- Includes EMG Quik-Connect Cable and Mounting Screws
- Product Dimensions: 2.75 x 2.38 x 6 inches
- Direct replacement for standard humbucking cavities
- Over-wound coil construction for enhanced output
The EMG H1A-B combines passive signal integrity with modern engineering, making it a proven option for studio work and session recording where you need consistent, artifact-free tone without active electronics in the signal chain.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H1A-B is a passive humbucker offering balanced, articulate output with warm resonance ideal for recording sessions across blues, rock, and jazz. Its Alnico V magnets and over-wound design deliver clear definition and minimal noise, making it a versatile choice for home-studio pickups that sit well in a mix and capture detail without active electronics. Install it as a drop-in replacement to add professional-grade shielding and consistency to your recording rig.
Who This Is For
| Best suited for | Blues, Rock, Jazz, Studio Sessions, Home Recording |
|---|---|
| Tonal character | Articulate, balanced output, warm and full-bodied, clear definition, resonant |
| Less specialized for | Djent, Thrash Metal (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Beginner / Intermediate / Advanced / Professional |
Frequently Asked Questions
Do I need a battery or active electronics to use this pickup?
No. The H1A-B is fully passive—it requires no battery, preamp, or onboard electronics. It delivers traditional passive tone with modern shielding and connects directly to your guitar's output jack.
Will this pickup fit my guitar?
Yes, if your guitar has a standard humbucking cavity. The H1A-B measures 2.75 x 2.38 x 6 inches with standard 0.388-inch pole piece spacing for Tune-o-matic bridges, making it a direct replacement for any stock humbucker.
What tone should I expect?
Warm, full-bodied response with articulate clarity and clear definition across frequencies. Wiring in series mode (1.65 kHz resonance) yields warmer character; parallel wiring (3.00 kHz) produces brighter, more articulate tone—choose based on your amp and playing style.
What's included in the box?
The pickup, a fully shielded EMG Quik-Connect cable for simplified installation, and mounting screws. Everything you need for a direct replacement install.
Is this pickup good for metal or high-gain styles?
The H1A-B is designed for blues, rock, jazz, and studio sessions. It's not optimized for djent or thrash metal—those genres typically benefit from pickups voiced for heavier saturation and aggression.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.