EMG H1A-B Passive Humbucker Pickup in Brushed Gold
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5673
Description
EMG H1A-B Passive Humbucker Pickup in Brushed Gold
The EMG H1A-B is a passive humbucker engineered to capture articulate, controlled output without the noise floor of active electronics. Its compact footprint and balanced response work equally well tracked from a bridge position or deployed as a full-range neck option, delivering clarity across both rhythm and lead takes without requiring onboard power—simplifying signal chain management and reducing session troubleshooting.
Tone & Recording Character
Over-wound coils paired with Alnico V magnets yield a response curve centered at 3.00 KHz (loaded), emphasizing midrange definition while controlling resonant peaks. The 13.65 kOhm DC resistance produces moderate output with natural compression, ideal for tracking sessions where note separation and harmonic content preserve mix clarity and reduce the need for corrective EQ in post-production.
Design & Installation
Pole piece spacing of .388" (9.85mm) conforms to standard Tune-o-matic bridge geometry, ensuring proper alignment and magnetic coupling for consistent recording performance across takes. The pickup ships ready to install with included 5-wire Quik-Connect cable and mounting screws, eliminating sourcing delays and incompatibility concerns so sessions stay on schedule.
Key Features
- Passive design—no power source or battery required
- Alnico/Steel magnet configuration with over-wound coils
- DC Resistance: 13.65 kOhm
- Inductance: 7.80 Henries
- Resonant Frequency (unloaded): 1.65 KHz
- Resonant Frequency (loaded): 3.00 KHz
- Impedance at Resonance (unloaded): 80.80 kOhm
- Pole Piece Spread: .388" (9.85mm) standard Tune-o-matic spacing
- Includes 5-wire Quik-Connect cable
- Includes mounting screws
- Product Dimensions: 2.75 x 2.38 x 6 inches
- Brushed Gold finish detail on logo
The H1A-B combines passive stability with refined midrange voicing, making it a straightforward swap for projects transitioning away from active systems or built around guitars that demand reliable, no-fuss tone for professional recording work.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The H1A-B is a passive humbucker engineered for studio recording with over-wound coils and Alnico V magnets that emphasize midrange definition and harmonic clarity at 3.00 kHz. Its balanced 13.65 kOhm output and natural compression characteristics sit well in progressive and hard-rock mixes, delivering controlled note separation that translates cleanly through mixing. Install it for sessions where articulate, noise-free tone and tonal stability matter more than maximum output.
Who This Is For
Great for
- ✓ Studio Sessions
- ✓ Home Recording
- ✓ Progressive
- ✓ Hard Rock
Not the best pick for
- – Extreme Metal
- – Drop Tunings
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between this passive pickup and an active EMG?
The H1A-B requires no onboard power or battery, eliminating noise floor and offering passive stability. It delivers lower output (13.65 kOhm DC resistance) with natural compression and emphasis on midrange clarity, whereas active EMGs typically provide higher output and consistent signal across wider frequency ranges.
Will this pickup fit my guitar?
The pole piece spacing of 0.388 inches conforms to standard Tune-o-matic bridge geometry, making it compatible with most electrics designed for standard humbucker installations. Verify your guitar's bridge type and humbucker cavity dimensions before purchasing.
What genre and tuning is this best suited for?
The H1A-B excels in progressive and hard-rock applications. It is not optimized for extreme metal or drop tunings, where higher output and darker voicings typically perform better.
What comes in the box?
The pickup ships with a 5-wire Quik-Connect cable and mounting screws, eliminating the need to source additional hardware for installation.
How does its tone profile compare to similar pickups?
The H1A-B is voiced for articulate midrange and note separation with controlled resonant peaks at 3.00 kHz (loaded). It sits tonally between the vintage warmth of a Seymour Duncan 59 and the higher-output aggression of a DiMarzio Super Distortion, offering clarity without extreme coloration.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.