EMG H1A-B Long Shaft Passive Humbucker Pickup in Brushed Black Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6811
Description
EMG H1A-B Long Shaft Passive Humbucker Pickup in Brushed Black Chrome
The EMG H1A-B is a refined passive humbucker engineered for recording and production applications where articulate, controlled output integrates seamlessly into mixed tracks without on-board preamps coloring the raw signal. Its Alnico V magnet and over-wound coil design deliver a balanced midrange character with natural compression, translating to consistent performance across high-gain sessions or cleaner, dynamics-preserving recordings. The brushed black chrome finish presents a understated aesthetic while the long-shaft design accommodates deeper pickup cavities on offset or semi-hollow instruments.
Tone & Output Characteristics
The pickup's 13.65 kOhm DC resistance and 7.80 Henries inductance produce a tight, focused response across the frequency spectrum. Dual resonant peaks at 1.65 kHz and 3.00 kHz emphasize vocal midrange presence while maintaining clarity in both rhythm and lead tracking, with an impedance at resonance of 80.80 kOhm for stable, predictable behavior across signal chains and mixing workflows.
Installation & Studio Workflow
This passive design requires no external power source, simplifying instrument wiring and eliminating battery maintenance concerns during long tracking sessions. The 5-wire quick-connect solderless output with full shielding accommodates both modern switching matrices and traditional hardwired setups, while included mounting screws and quick-connect cable enable straightforward installation in guitars with 0.388" (9.85mm) standard pole piece spacing.
Key Features
- Magnet Type: Alnico V
- Coil Configuration: Over-wound coils
- DC Resistance: 13.65 kOhm
- Inductance: 7.80 Henries
- Resonant Frequency: 1.65 kHz and 3.00 kHz dual peaks
- Impedance at Resonance: 80.80 kOhm
- Pole Piece Spread: 0.388" (9.85mm) standard
- Connectivity: 5-wire quick-connect solderless output with full shielding
- Power Source: Passive—no battery or external power required
- Included Accessories: 5-wire quick-connect cable and mounting screws
- Finish: Brushed Black Chrome
- Product Dimensions: 2.75 x 2.38 x 6 inches
The H1A-B combines the sonic directness of passive design with EMG's precision engineering, offering a versatile pickup for producers prioritizing tone shaping through the amplifier and effects chain during tracking and mixing rather than on-board electronics.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The H1A-B is a passive pickup engineered for studio tracking and mixing in rock, metal, and progressive sessions, offering dual resonant peaks that carve vocal midrange presence while keeping rhythm and lead clarity intact. Its 13.65 kOhm resistance and balanced output sit well in a mix without requiring preamp circuitry, letting you shape tone entirely through your amp and effects—ideal for producers capturing articulate, predictable takes without battery anxiety or signal conditioning overhead. The solderless 5-wire quick-connect output simplifies session changeovers and retrofit sessions on offset or semi-hollow instruments.
Who This Is For
| Best suited for | Hard Rock, Metal, Progressive, Studio Sessions, Gigging |
|---|---|
| Tonal character | Tight low end, articulate midrange, natural compression, focused response, vocal presence |
| Less specialized for | Folk, Country (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Do I need a battery or external power supply to use this pickup?
No. The H1A-B is fully passive with no on-board preamps or active circuitry, so it requires no battery or external power source. This simplifies wiring and eliminates battery maintenance concerns.
What instruments can this pickup fit in?
The long-shaft design is engineered for guitars with deeper pickup cavities, including offset and semi-hollow body instruments. Standard pole piece spacing is 0.388 inches (9.85mm). Included mounting screws and the quick-connect cable enable straightforward installation.
How does this compare to active EMG pickups like the 81/85?
The H1A-B is passive, so it delivers tone shaping through your amplifier and effects chain rather than on-board electronics. Compared to active 81/85 models, it offers natural compression and a more direct sonic character, making it ideal for players who prefer amp-centric tone control and no battery dependency.
What styles of music is this pickup best suited for?
The H1A-B excels in hard rock, metal, and progressive music, handling both high-gain and cleaner voicings. Its articulate midrange and tight low end work well for rhythm and lead applications in these genres.
What wiring setup does this pickup use?
The H1A-B features a 5-wire quick-connect solderless output with full shielding, which accommodates both modern switching matrices and traditional hardwired setups. A quick-connect cable and mounting screws are included.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.