EMG H1-B Long Shaft Passive Humbucker Pickup in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG7487
Description
EMG H1-B Long Shaft Passive Humbucker Pickup in Brushed Chrome
The EMG H1-B is a passive humbucker engineered to deliver clarity and articulation in bridge positions without requiring batteries or external power sources—ideal for tracking and mixing applications where pure signal integrity matters. The brushed chrome finish maintains a professional appearance in studio setups, while the long shaft design accommodates deeper-set bridge cavities common in modern instrument designs. This pickup excels at cutting through dense mixes with focused midrange presence and controlled output, translating well through the signal chain and into your DAW.
Tonal & Electrical Performance
With a DC resistance of 13.65 kOhm and 7.15 Henries inductance, the H1-B maintains articulation across multiple gain stages without introducing mud or unwanted coloration—essential for layered recordings and overdubs. The resonant frequency of 1.65 KHz and impedance at resonance of 74.00 kOhm create a tight, controlled midrange response that sits well in a mix, while the over-wound coils and ceramic magnets ensure consistent magnetic output and tonal definition session after session.
Design & Construction
The visible pole pieces allow direct visual confirmation of proper installation and alignment during setup. A 5-wire cable enables series/parallel switching—offering tonal flexibility for capturing different voicings within a single session—while the 0.388" pole spread (9.85mm) ensures precise alignment with Tune-o-matic bridge saddles and standard Gibson-style installations.
Key Features
- DC Resistance: 13.65 kOhm
- Inductance: 7.15 Henries
- Resonant Frequency: 1.65 KHz
- Impedance at Resonance: 74.00 kOhm
- Pole Spread: 0.388" (9.85mm) for Tune-o-matic bridges
- Over-wound coils and ceramic magnets
- Visible pole pieces
- 5-wire cable with series/parallel switching capability
- Passive design — no power source required
- Long shaft configuration for deeper bridge cavities
- Brushed chrome finish
The H1-B combines passive reliability with precise electrical design, delivering professional recording control and mechanical stability for bridge-position work across diverse recording and production scenarios.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The H1-B is a passive bridge humbucker that brings definition and controlled midrange to recording sessions, ideal for hard rock and metal tracking where clarity and articulation matter. At 13.65 kOhm DC resistance and 1.65 kHz resonant frequency, it stays balanced and focused across overdrive and distortion without adding mud or bloat to your mix. No batteries required, straightforward wiring, and series/parallel switching give you studio versatility without fuss.
Who This Is For
| Best suited for | Hard Rock, Metal, Rock, Studio Sessions, Gigging |
|---|---|
| Tonal character | Tight controlled midrange, articulate, balanced output, focused presence, minimal mud |
| Less specialized for | Jazz, Folk, Country (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Is this pickup passive, or does it need a battery?
The H1-B is fully passive and requires no battery or external power. It's a drop-in replacement for standard bridge humbuckers and works with any amp and signal chain without additional electronics.
Will this fit my guitar's bridge cavity?
The long shaft design is made for deeper-set bridge cavities common in modern instruments. The 0.388-inch pole spread aligns with Tune-o-matic bridges and standard Gibson-style installations; confirm your guitar's cavity depth and bridge type before ordering.
What genres and playing styles does the H1-B suit?
It's purpose-built for hard rock, metal, and rock with strong bridge-position clarity and focused midrange presence. Jazz, folk, and country players may find the tight, controlled character too directional for their tonal needs.
Can I switch the tone with the 5-wire cable?
Yes. The 5-wire cable supports series/parallel switching, allowing you to dial in tonal flexibility between a brighter, more articulate parallel mode and a hotter, tighter series mode without rewiring.
How does the H1-B compare to other high-output passive humbuckers?
With 13.65 kOhm resistance and a 1.65 kHz resonant peak, it sits between the Seymour Duncan 59 and the DiMarzio Super Distortion—cleaner and more articulate than the Super Distortion but with more presence than the 59, making it a bridge specialist for modern hard-rock and metal rigs.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.