EMG H1-B Long Shaft Passive Humbucker Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6841
Description
EMG H1-B Long Shaft Passive Humbucker Pickup in Black
The EMG H1-B is a passive humbucker engineered for bridge-position tracking in tune-o-matic equipped guitars. Its overwound ceramic-magnet construction captures articulate, punchy midrange—ideal for recording sessions where clarity and definition cut through dense arrangements without requiring onboard preamps or batteries. A direct path to tonal upgrade that keeps signal flow simple and noise-free.
Tone & Recording Response
At 13.6 kOhm DC resistance and 7.15 Henries inductance, this pickup prints focused, defined tracks with controlled treble response. The 1.65 kHz resonant frequency (at 500K load) and 74 kOhm impedance at resonance emphasize midrange articulation in the mix, while the 5-wire cable enables series/parallel switching for tonal flexibility across takes and overdubs.
Installation & Session Compatibility
Designed as a bridge-position unit, the H1-B features a long shaft configuration with .388" (9.85mm) pole piece spread optimized for tune-o-matic bridge guitars. Its passive architecture—requiring no power source—simplifies wiring and eliminates battery-dependent operation, making it an efficient drop-in for existing passive electronics or new builds entering the studio.
Key Features
- Ceramic magnet construction
- Overwound coils for enhanced output
- 13.6 kOhm DC resistance
- 7.15 Henries inductance
- 1.65 kHz resonant frequency at 500K load
- 3.12 kHz resonant frequency at 1 MegOhm load
- 74 kOhm impedance at resonance (500K load)
- .388" pole piece spread for tune-o-matic bridges
- 5-wire cable with series/parallel switching capability
- Bridge position configuration
- Passive operation—no external power required
- Black housing
The H1-B delivers articulate, midrange-focused tracking in a passive package, essential for producers and engineers prioritizing tonal definition and straightforward installation in the control room.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG H1-B is a passive ceramic bridge humbucker engineered for articulate midrange and punchy output that cuts through dense mixes without muddiness. Home recordists and producers working in rock and metal will appreciate the focused, defined tone and 5-wire switching for tracking flexibility, all without powering external preamps. Drop it into tune-o-matic guitars for immediate tonal upgrade with zero battery dependency.
Who This Is For
| Best suited for | Rock, Metal, Hard Rock, Studio Sessions, Gigging |
|---|---|
| Tonal character | Articulate midrange, punchy output, controlled treble, focused definition, ceramic warmth |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What guitar bridge type does the H1-B fit?
The H1-B is designed for tune-o-matic bridge spacing with a .388 inch pole piece spread and long shaft configuration. It is a bridge-position-only unit, so verify your guitar's bridge type before ordering.
Do I need a battery or preamp to use this pickup?
No. The H1-B is fully passive and requires no external power source or onboard electronics. It works with standard passive guitar wiring and simplifies installation.
Can I switch between series and parallel modes?
Yes. The 5-wire cable enables series/parallel switching, giving you tonal flexibility for different playing styles and recording scenarios within the same pickup.
What genres is this pickup best suited for?
The H1-B excels in rock, metal, and hard rock where articulate midrange and punchy output are priorities. It is not recommended for jazz, blues, or folk playing styles.
How does the H1-B compare to other bridge humbuckers?
The EMG H1-B sits between the Seymour Duncan SH-4 JB and DiMarzio Super Distortion in output and tone. Its 13.6 kOhm resistance and ceramic construction emphasize definition and midrange focus without the brightness of some aftermarket alternatives.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.