EMG F-H1A Passive Humbucker Pickup in Brushed Gold
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG8169
Description
EMG F-H1A Passive Humbucker Pickup in Brushed Gold
The EMG F-H1A is a specialized passive humbucker engineered for Floyd Rose-equipped guitars, delivering a warm, articulate response without active circuitry. This Alnico-magnet design produces vintage-leaning tones with modern clarity, making it an excellent choice for tracking sessions where passive character and precision pole alignment matter in a vibrato-equipped setup.
Tone & Recording Performance
Built with over-wound coils and adjustable pole pieces, the F-H1A achieves a DC Resistance of 13.65 kOhm and Inductance of 7.80 Henries, yielding dual resonant peaks at 1.65 KHz and 3.00 KHz for articulate midrange definition and natural compression that sits well in dense mixes. The Impedance at Resonance of 80.80 kOhm ensures tight coupling with standard guitar electronics and transparent signal path through interface chains and studio cabling.
Studio Installation & Compatibility
This pickup is purpose-built for Floyd Rose bridges with 0.410" (10.41mm) string-to-string pole spacing, ensuring precise magnetic alignment under tremolo systems for consistent tracking across multiple takes. The 5-wire Quik-Connect output with shielding simplifies wiring, reduces induced noise in the control room, and facilitates quick session swaps, while the brushed gold finish provides a refined appearance in any studio setting.
Key Features
- Alnico magnet construction for warm, vintage-influenced tone
- DC Resistance: 13.65 kOhm
- Inductance: 7.80 Henries
- Dual resonant frequencies at 1.65 KHz and 3.00 KHz
- Impedance at Resonance: 80.80 kOhm
- Floyd Rose pole spacing: 0.410" (10.41mm) string-to-string
- Over-wound coils with adjustable pole pieces
- 5-wire Quik-Connect output with shielding
- Brushed gold finish
- Passive design—no batteries or active circuitry required
The F-H1A delivers articulate, dimensioned passive tone in a format optimized for Floyd Rose systems, making it an excellent retrofit option for engineers upgrading vibrato-equipped instruments for controlled, repeatable recordings.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG F-H1A is a passive humbucker engineered for precise recording and tracking in hard rock and metal sessions, offering warm, articulate character that sits cleanly in dense mixes. With Alnico construction and dual resonant peaks tuned for articulate midrange and natural compression, it captures dimensioned, controlled tone ideal for layered productions and overdub work. The passive design integrates seamlessly into standard studio signal chains without batteries or active electronics, and the Floyd Rose-specific pole spacing ensures magnetic precision on vibrato systems.
Who This Is For
| Best suited for | Hard Rock, Metal, Progressive, Studio Sessions, Gigging |
|---|---|
| Tonal character | Warm, articulate, vintage-leaning, tight coupling, natural compression |
| Less specialized for | Folk, Country (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
Is this pickup compatible with my Floyd Rose bridge guitar?
Yes—the F-H1A is purpose-built for Floyd Rose systems with 0.410-inch string-to-string pole spacing, ensuring precise magnetic alignment under tremolo operation. It is a retrofit replacement for Floyd Rose-equipped guitars and will not fit standard non-tremolo guitar cavities.
Do I need a battery or active electronics to use this pickup?
No. The F-H1A is fully passive and requires no battery, active circuitry, or preamp—just plug it into your standard guitar electronics and amp.
How does the tone compare to active EMG pickups?
The F-H1A delivers warm, vintage-leaning passive character with articulate midrange and natural compression, differing from active EMG designs in responsiveness and feel. It produces dual resonant peaks at 1.65 kHz and 3.00 kHz, yielding tight coupling and clarity suitable for hard rock, metal, and studio tracking without the midrange lift typical of active designs.
What is the DC resistance and output level?
The F-H1A has a DC Resistance of 13.65 kOhm and Inductance of 7.80 Henries, with an Impedance at Resonance of 80.80 kOhm. This spec yields controlled, articulate output that pairs well with standard guitar amplifier and recording interface inputs without signal loss.
What wiring does it use?
The F-H1A includes a 5-wire Quik-Connect output with shielding, simplifying installation and reducing noise coupling from longer cable runs.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.