EMG F-57TW/66TW Active Humbucker Pickup Set in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6734
Description
EMG F-57TW/66TW Active Humbucker Pickup Set in Chrome
The EMG 57TW/66TW set captures the aggressive, articulate character essential for modern metal and hard rock tracking. These covered chrome humbuckers combine active amplification with EMG's proprietary three-coil design, delivering genuine single-coil clarity and dual-coil punch from a single pickup configuration. The solderless wiring harness accelerates session setup, and the included push-pull potentiometers enable real-time mode switching—perfect for experimenting with tonal character during overdubs without circuit modifications.
Tone & Recording Performance
The bridge F-57TW uses Alnico/Ceramic magnets for aggressive output and tight low-end definition that cuts through dense mixes, while the neck 66TW pairs Alnico/Steel magnets for warmer, more articulate response suited to rhythm layers and harmonic detail. Both pickups operate on active amplification with 10K DC resistance, delivering consistent gain and clarity across your entire dynamic range—critical for high-gain recording where pick attack, note separation, and sustain balance equally in the final mix.
Installation & Workflow
The solderless connectivity and included 5-wire plus ground and battery configuration eliminate traditional soldering, streamlining instrument prep between sessions. Each pickup includes its own push-pull potentiometer for mode switching, plus two standard tone controls, letting you audition and capture single and dual-coil character within the same take—a significant advantage when tracking and comparing tonal approaches.
Key Features
- Active Humbucker Set with selectable single and dual-coil modes
- HH configuration (Humbucker/Humbucker)
- Bridge pickup: Alnico/Ceramic magnet construction
- Neck pickup: Alnico/Steel magnet construction
- 10K DC resistance
- 5-wire plus ground and battery conductors
- Solderless connectivity with included wiring harness
- Push-pull potentiometer included for each pickup
- Two standard tone controls included
- Covered humbucker design with chrome finish
- 1.1" thickness (standard humbucker depth)
- 6-string configuration
This set represents EMG's refined approach to versatile high-output tone—mode-switching capability, solderless installation, and road-tested magnet pairing combine to give you both immediate usability and real tonal range.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG F-57TW/66TW active humbucker set excels in studio tracking and high-gain recording sessions, offering selectable single and dual-coil modes that let you dial in clarity or thickness on the fly without re-recording. The tight low-end and aggressive output cut through dense mixes and dense arrangements, while active amplification delivers consistent gain-staging across overdubs and layering. Mode-switching via push-pull pots means you capture multiple tonal characters in one session without swapping pickups or repatching.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, High-gain Soloing |
|---|---|
| Tonal character | Aggressive output, tight low end, articulate cleans, high-gain clarity, dual-coil punch |
| Less specialized for | Jazz, Blues, Country (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What is the difference between the bridge F-57TW and neck 66TW pickups?
The F-57TW uses Alnico/Ceramic magnets for aggressive output and tight low-end definition, while the 66TW pairs Alnico/Steel magnets for warmer, more articulate response. Both run active amplification at 10K DC resistance, so they sit well together in a set while maintaining distinct sonic character.
Do I need to solder these pickups, and what tools or skills are required?
No—the solderless wiring harness and 5-wire plus ground and battery configuration eliminate traditional soldering. Installation is accessible for players comfortable with basic wiring; no routing or modification is needed.
Can I switch between single-coil and dual-coil tones?
Yes. Each pickup includes a push-pull potentiometer for mode switching, allowing you to voice single and dual-coil tones on the fly without additional circuit modifications or routing.
What genres and playing styles are these pickups suited for?
The F-57TW/66TW set is designed for metal, hard rock, progressive music, and high-gain soloing where aggressive output and note definition are priorities. They are not recommended for jazz, blues, or country.
What is included in the set?
The set includes the F-57TW bridge pickup, 66TW neck pickup, solderless wiring harness, push-pull potentiometer for each pickup, two standard tone controls, and all necessary connectors and battery configuration hardware for a 6-string guitar.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $22 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.