EMG F-57/66 Active Humbucker Pickup Set in Gold
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG5998
Description
EMG F-57/66 Active Humbucker Pickup Set in Gold
The EMG F-57/66 set captures controlled aggression and articulate midrange definition essential for tracking modern rock, metal, and high-gain material. The F-spacing bridge humbucker pairs with a balanced neck unit, delivering clarity during layered overdubs and definition across the full frequency spectrum. These pickups maintain output integrity and signal coherence through the recording chain—critical for sessions where punch and separation matter in the mix.
Recording Performance & Tone
The 57 bridge pickup yields 3.00V string output and 4.50V strum output with a 2.11 kHz resonant frequency, capturing punchy articulation without mud or compression artifacts in the recording. The 66 neck pickup operates at the same output levels with a 1.61 kHz resonant frequency, providing warmer, fuller tones for rhythm tracking and lead sustain that sits naturally in dense arrangements. Both units run on an active circuit with 160 microamp current draw at 9V and -100 dB output noise, ensuring transparent amplification with minimal noise floor interference during recording and mixing.
Studio Setup & Wiring
EMG's Exclusive Solderless Install System streamlines session preparation—push-in quick-connect terminals eliminate soldering and reduce setup time. The complete set includes 2 × 25K volume pots, 2 × 25K tone pots, battery bus, stereo output jack, two-pickup bus, mounting hardware, pickup cables, connect cables, output cable, and battery cable—a full system for retrofitting instruments destined for the studio.
Key Features
- Bridge pickup: Alnico V magnet with steel pole pieces; F-spacing (52mm wide)
- Neck pickup: Alnico V magnet with steel pole pieces
- 57 Bridge — Resonant Frequency: 2.11 kHz; Output: 3.00V string / 4.50V strum; 10 Kohm impedance
- 66 Neck — Resonant Frequency: 1.61 kHz; Output: 3.00V string / 4.50V strum; 10 Kohm impedance
- Active circuitry with 160 microamp current draw at 9V supply
- Output noise: -100 dB across both pickups
- Battery life: 1500 hours on standard 9V battery
- Solderless quick-connect push-in terminals for fast installation
- Included pots: 2 × 25K volume, 2 × 25K tone
- Complete wiring harness: battery cable, output cable, four connect cables, and two pickup cables
- Mounting hardware: screws and springs for both pickups
- Stereo output jack with two-pickup in/out bus configuration
This set delivers proven EMG engineering—tight, focused output with the headroom and signal clarity that recording sessions demand.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG F-57/66 set captures tight, articulate high-gain tones with a clean noise floor—ideal for recording aggressive rock and metal where definition and output headroom support dense, layered arrangements. The bridge pickup's punchy midrange cuts through the mix while the neck unit delivers warmth and sustain for rhythm layers and overdubs, and the active circuit ensures consistent signal integrity across tracking and mixing. Complete wiring and solderless connectors mean fast, reliable installation so you can focus on capturing great takes.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Drop Tunings
- ✓ High-Gain Styles
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What is F-spacing, and does it matter for my guitar?
F-spacing refers to a 52mm pickup width designed to align with the wider string spacing of modern 7-string and 8-string guitars, or thinner guitars with offset bridge posts. If you play a standard 6-string with conventional bridge spacing, you may need the standard-spacing version instead; verify your bridge post configuration before ordering.
Do these pickups require soldering?
No. EMG's solderless quick-connect push-in terminals eliminate the need for a soldering iron. The complete set includes all pots, cables, and mounting hardware, so installation is straightforward and reversible.
How long does a 9V battery last?
A standard 9V battery lasts approximately 1500 hours of playing time before replacement. The active circuit draws only 160 microamps, making battery life practical for gigging and session work.
How do the F-57 and 66 differ tonally?
Both deliver 3.00V/4.50V output, but the F-57 bridge has a 2.11 kHz resonant peak for punchy, articulate aggression, while the 66 neck sits at 1.61 kHz for warmer, fuller rhythm tones. Together they provide clarity at high gain without losing definition or sustain.
What is included in the set?
The set includes both pickups, two 25K volume pots, two 25K tone pots, stereo output jack, battery bus and cables, pickup and wiring harnesses, mounting hardware, and a complete battery cable. You receive everything needed for a full retrofit.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. On this item that is roughly $19 less out the door than the same listed price at a national retailer or on a marketplace. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.