EMG F-57/66 Active Humbucker Pickup Set in Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6037
Description
EMG F-57/66 Active Humbucker Pickup Set in Chrome
The EMG 57/66 set captures articulate, controlled high-output tone with the flexibility of single- and dual-coil voicing from a single pickup configuration. Chrome covers provide classic aesthetics while the active electronics ensure consistent signal integrity and extended recording sessions. This set tracks with aggressive clarity without sacrificing dynamic response across pickup modes, translating well through gain staging and mix processing.
Tone & Electronics for Recording
Active circuitry produces 3V output on single notes and 4.5V on strummed chords, with a noise floor of -100 dB at 60 Hz—critical for tracking high-gain tones and studio recording where signal-to-noise ratio directly impacts final tone and layering. The 57 bridge pickup (2.11 kHz resonant frequency) emphasizes articulation and pick attack for clarity in dense mixes, while the 66 neck pickup (1.61 kHz resonant frequency) delivers warmer, more complex harmonic response for lead overdubs and sustained tones that sit well in full arrangements.
Studio Integration & Workflow
Solderless design with included wiring harness and push-pull potentiometers on each pickup eliminates complicated soldering and enables mid-session mode switching without rewiring—valuable for A/B testing during tracking or capturing different voicings in a single pass. The 9V battery delivers 1500 hours of runtime at standard current draw (160 mA across the set), and the circuit accepts up to 27V DC for users running higher-voltage supplies for increased headroom during dynamic passages.
Key Features
- Active Humbucker set with Single- and Dual-coil modes
- HH configuration (2-piece set)
- Covered pickups in chrome finish
- Alnico/Ceramic magnet (bridge), Alnico/Steel magnet (neck)
- 5-wire plus ground and battery connectivity
- 10K DC resistance
- 3V output on single notes; 4.5V output on strummed chords
- -100 dB output noise floor at 60 Hz
- 1500-hour battery life at 9V
- Maximum supply voltage: 27V DC
- Solderless wiring harness and push-pull potentiometers included
- 1.1 inch thickness (standard EMG humbucker profile)
The combination of controlled output, low noise, and instant mode-switching capability makes this set a straightforward upgrade path for producers transitioning to active electronics without extensive rewiring, enabling rapid experimentation and tonal shaping across multiple tracking sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The F-57/66 is an active humbucker pair engineered for recording high-output guitar tones with exceptional articulation and a noise floor of -100 dB, making it ideal for metal, hard rock, and studio sessions where clarity cuts through dense mixes. The bridge pickup (57) emphasizes pick attack and definition while the neck pickup (66) delivers warm, complex harmonics for lead tracking and layered parts. Solderless installation and mode-switching via push-pull pots let you capture multiple tonal palettes in one session without rewiring.
Who This Is For
| Best suited for | Metal, Hard Rock, Studio Sessions, High-Gain Applications |
|---|---|
| Tonal character | Articulate attack, high output, controlled clarity, low noise floor, warm neck response |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What's the difference between the bridge and neck pickups in this set?
The 57 bridge pickup has a 2.11 kHz resonant frequency tuned for articulate attack and pick definition, while the 66 neck pickup uses 1.61 kHz for warmer, more complex harmonic response suited to sustained notes and lead work. Both are active humbuckers with switchable single- and dual-coil modes via included push-pull potentiometers.
How long does the battery last and what's the output noise level?
At 9V, the battery delivers approximately 1500 hours of runtime with standard current draw (160 mA across the set). The noise floor is -100 dB at 60 Hz, making it ideal for high-gain and studio applications where signal-to-noise ratio is critical.
Do I need to solder these pickups, or is installation straightforward?
No soldering required—the set includes a solderless wiring harness and push-pull potentiometers pre-assembled for mode switching. Installation is plug-and-play, and you can switch between single- and dual-coil voicing without rewiring.
What genres and playing styles is this set best suited for?
These pickups are optimized for metal, hard rock, high-gain applications, and studio sessions. They are not recommended for jazz, blues, or folk styles, as their aggressive articulation and high output are engineered specifically for modern rock and metal tones.
Can I run these on a higher voltage supply for more headroom?
Yes, the circuit accepts up to 27V DC maximum supply voltage, allowing you to increase headroom beyond the standard 9V if needed.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $19 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.