EMG F-57/66 Active Humbucker Pickup Set in Brushed Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG6002
Description
EMG F-57/66 Active Humbucker Pickup Set in Brushed Chrome
The EMG 57/66 set captures tight, articulate response with controlled dynamics across the full frequency spectrum. This matched pair is engineered for tracking precision and consistency in the studio—the bridge pickup punches with clarity on rhythm and lead takes while the neck pickup maintains definition without muddiness in dense mixes. The brushed chrome finish integrates cleanly into any recording rig aesthetic.
Tone & Output Characteristics
The 57 bridge resonates at 2.11 kHz with 3.00V string output and 4.50V strum output, delivering aggressive articulation that cuts through dense arrangements and sits well in both rhythm and lead sessions. The 66 neck operates at a lower 1.61 kHz resonant frequency with matching output levels, providing warmth and sustain without sacrificing note separation in multitrack recording. Both pickups feature Alnico V magnets and maintain a 10K DC resistance and 10 Kohm output impedance for transparent signal transfer to your interface and console.
Active Electronics & Installation
The active circuit operates on a single 9V battery with 160 microamp current draw and an exceptional 1500-hour battery life, eliminating mid-session power concerns during tracking sessions. The circuit supports up to 27V DC maximum supply for extended headroom and clean signal capture. Installation is streamlined with solderless connectivity and a 1/4" mono phone plug connector; the included wiring harness, individual push-pull potentiometers, and dual tone controls mean faster setup and no soldering required while maintaining full tonal flexibility for session versatility.
Key Features
- Matched humbucker pair: 57 bridge and 66 neck
- Alnico V magnets with ceramic pole pieces (66 neck)
- 2.11 kHz resonant frequency (57 bridge); 1.61 kHz (66 neck)
- 3.00V output voltage (string pluck); 4.50V (strummed)
- 10K ohm DC resistance and 10 Kohm output impedance
- Active circuit with 160 microamp current draw at 9V
- 1500-hour battery life per charge
- 27V DC maximum supply voltage rating
- Solderless connectivity with 1/4" mono phone plug connector
- Includes solderless wiring harness
- Individual push-pull potentiometer per pickup
- Two standard tone control configuration
This set combines aggressive bridge articulation with warm neck response in a compact, battery-efficient package that installs without soldering—ready for immediate tracking.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG F-57/66 active humbucker pair captures tight, articulate response across metal, hard rock, and progressive sessions—delivering controlled dynamics that sit cleanly in dense mixes without sacrificing sustain or note definition. The 57 bridge resonates at 2.11 kHz for aggressive punch on rhythm and lead tracking, while the 66 neck operates at 1.61 kHz for warm, defined tones that cut through without muddiness. Active electronics powered by a single long-life 9V battery eliminate noise and offer extended headroom, and solderless installation keeps studio setup straightforward.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Studio Sessions, Gigging |
|---|---|
| Tonal character | Tight low end, articulate highs, high output, controlled dynamics, note separation |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What guitar styles and genres are these pickups best suited for?
The F-57/66 set is engineered for metal, hard rock, progressive, and studio work—genres that benefit from tight articulation, high output, and controlled dynamics. They are not recommended for jazz, blues, or folk applications where warmer, more open voicing is typically preferred.
How long does the battery last, and what's the installation process?
The active circuit runs on a single 9V battery with an exceptional 1500-hour battery life per charge. Installation is solderless—the set includes a wiring harness and 1/4" mono phone plug connector, eliminating the need for traditional soldering while maintaining full tonal flexibility with individual push-pull potentiometers and dual tone controls.
How do the bridge and neck pickups differ tonally?
The 57 bridge resonates at 2.11 kHz with aggressive articulation ideal for rhythm and lead work, delivering 3.00V string output and 4.50V strummed output. The 66 neck operates at a lower 1.61 kHz resonant frequency with matching output levels, providing warmth and sustain while maintaining note separation without muddiness.
What are the key specs and output characteristics?
Both pickups feature Alnico V magnets with 10K DC resistance and 10 Kohm output impedance for transparent signal transfer. The active circuit draws 160 microamps at 9V and supports up to 27V DC maximum supply for extended headroom, ensuring consistent performance across varying instrument configurations.
How do these compare to other popular active humbucker sets?
The F-57/66 is comparable to the Seymour Duncan JB Jr., DiMarzio Evolution, and EMG 81/85, offering a balance of aggressive articulation and note separation with a battery-efficient active design and solderless installation that rivals premium alternatives.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. At a typical 7% rate that is an estimated $19 less at checkout than the same listed price on a marketplace, which collects sales tax as the facilitator in most states. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.