EMG 89R Active Humbucker Pickup in Ivory
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG2626
Description
EMG 89R Active Humbucker Pickup in Ivory
The EMG 89R is a dual-mode active humbucker that captures articulate single-coil clarity and full humbucker punch from a single housing. Its reverse-wound coil design with separate preamps grants instant access to both tonal characters via a push/pull control, enabling flexible tracking and layering across bridge or neck position on various sources and session demands.
Tone & Electronics
This active design operates on a standard 9-volt battery, drawing just 152 microamps for exceptional battery life of approximately 3,290 hours. The 89R excels at noise rejection in the tracking environment: humbucker mode produces –99 dBV of noise with a resonant frequency of 2.55 kHz, while single-coil mode sits at –94 dBV with a 3.75 kHz peak, delivering clean, usable fundamentals across both configurations for precise mix integration.
Output & Connectivity
Output levels are balanced for direct interface with preamps and audio interfaces: 1.0V RMS (3.0V peak) in humbucker mode and 0.6V RMS (1.7V peak) in single-coil mode, with a DC resistance of 10K ohms. The solderless 5-wire-plus-ground architecture streamlines installation, while the included Quik-Connect cable and pre-wired push/pull volume/tone control set accelerate session setup and channel switching.
Key Features
- Active powered design requiring 9-volt battery
- Alnico V magnets for warm, resonant response
- Reverse-wound coils with separate preamps for dual single-coil and humbucker modes
- Humbucker mode: 1.0V RMS output, 2.55 kHz resonant frequency, –99 dBV noise floor
- Single-coil mode: 0.6V RMS output, 3.75 kHz resonant frequency, –94 dBV noise floor
- 152 microamp current draw with 3,290-hour battery life at 9V
- 10K DC resistance
- Solderless 5-wire-plus-ground connection
- Ivory covered finish
- Suitable for bridge and neck positions
- Includes Quik-Connect cable, pre-wired push/pull control set, output jack, battery clip set, screws, and springs
The EMG 89R combines dual switchable modes with professional-grade active electronics, delivering studio-ready low-noise capture and tonal versatility across production sessions.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 89R delivers studio-grade articulate cleans in single-coil mode and thick, resonant humbucker punch with the flip of a switch, making it a one-pickup solution for tracking rock, metal, and progressive sessions. Its exceptionally low noise floor (–99 dBV humbucker / –94 dBV single-coil) and balanced output levels (1.0V RMS humbucker / 0.6V RMS single-coil) sit cleanly in any mix without requiring heavy gate processing. The active preamp design and Alnico V magnets yield warm, focused fundamentals that sit well during overdubs and final mix work.
Who This Is For
Great for
- ✓ Rock
- ✓ Metal
- ✓ Progressive
- ✓ Hard Rock
- ✓ Studio Sessions
Not the best pick for
- – Traditional Jazz
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What's the difference between humbucker and single-coil mode on this pickup?
The push/pull control switches between two separate preamps in the reverse-wound coil design. Humbucker mode delivers 1.0V RMS output with a 2.55 kHz resonant peak and –99 dBV noise floor, while single-coil mode produces 0.6V RMS output with a 3.75 kHz peak and –94 dBV noise floor for brighter, thinner tones.
How long does the battery last?
The 9-volt battery draws only 152 microamps, providing approximately 3,290 hours of playing time—roughly 4.5 months of continuous use or well over a year of normal gigging.
Is this pickup suitable for neck and bridge positions?
Yes, the EMG 89R is designed for both bridge and neck positions, making it versatile for single-pickup upgrades or full-guitar rewires.
What's included in the box?
The package includes the pickup, Quik-Connect cable, pre-wired push/pull volume/tone control set, output jack, battery clip set, mounting screws, and springs for immediate installation.
How difficult is the installation?
The solderless 5-wire-plus-ground architecture and pre-wired control set simplify setup significantly; no soldering is required, and the Quik-Connect system speeds up the wiring process.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.