EMG 81 Long Shaft Active Humbucker Pickup in Brushed Chrome
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4598
Description
EMG 81 Long Shaft Active Humbucker Pickup in Brushed Chrome
The EMG 81 Long Shaft is a studio-proven active humbucker engineered for precision tracking and controlled aggression in the mix. Its 2.25 kHz resonance peak carves articulate midrange detail and upper-harmonic definition—essential for cut-through in dense arrangements and multi-tracked sessions. The long shaft (19mm) fits Les Paul–style and set-neck instruments without modification, making it ideal for retrofitting your tracking guitar or maintaining a dedicated session instrument. Brushed chrome finish and covered design keep aesthetics clean and professional in any studio context.
Recording Tone & Output Performance
The 81 delivers 1.75 V peak output and 1.25 V RMS—enough clean gain to drive interface preamps or outboard preamps without noise bloat. Its +91 dBV output noise floor and 10 kOhm output impedance maintain signal integrity over long cable runs to your DAW interface or console, critical for session work where every decibel of clarity matters. The midrange emphasis and controlled sustain capture articulate note definition across all registers, translating well to both direct capture and amp-miked scenarios.
Studio Integration & Installation
EMG's solderless installation system streamlines guitar prep—no soldering iron required. The pickup arrives complete with volume and tone potentiometers, output socket, battery clip set, mounting screws, and springs, enabling fast swap-outs between sessions. Powered by a standard 9 V battery with 3000-hour battery life and minimal 80 µA idle current draw, the active circuitry runs lean, maximizing uptime between changes during long tracking days.
Key Features
- Active humbucker with ceramic magnet
- Long shaft (19mm) for Les Paul and set-neck guitars
- Brushed chrome covered design
- 2.25 kHz resonance frequency for defined midrange articulation
- 1.75 V peak output, 1.25 V RMS
- +91 dBV output noise specification
- 10 kOhm DC resistance and output impedance
- Solderless installation system—no soldering required
- 9 V battery operation with 3000-hour battery life
- 80 µA current draw at 9 V
- Two-wire plus battery connectivity
- Includes potentiometers, output socket, battery clip, mounting hardware
The EMG 81 Long Shaft combines high output with low noise and straightforward installation—a dependable choice for tracking and session work where signal clarity and consistent performance matter.
More Information
| Condition | New |
|---|---|
| Finish | Brushed Chrome |
Reviews
At a Glance
The EMG 81 Long Shaft is a high-output active humbucker that sits naturally in heavy, articulate mixes with its pronounced midrange and controlled low end. Its solderless design and included potentiometers make integration into your recording setup instant and hassle-free, while the +91 dBV noise floor keeps your signal clean on long cable runs to interfaces and preamps. Record aggressive riffs, sustained lead lines, and complex progressions with the note separation and dynamic response that's made the 81 a studio standard for metal and hard-rock production.
Who This Is For
| Best suited for | Metal, Hard Rock, Progressive, Drop Tunings |
|---|---|
| Tonal character | Aggressive, articulate midrange, high output, defined note separation, sustained |
| Less specialized for | Jazz, Blues, Folk (it will do it; instruments voiced for that style do it more easily) |
| Skill level | Intermediate / Advanced / Professional |
Frequently Asked Questions
What does the long shaft mean, and will it fit my guitar?
The long 19mm shaft is designed for set-neck and Les Paul–style guitars where the pickup cavity runs deeper than on bolt-on necks. If your guitar has a Les Paul, semi-hollow, or similar construction, it will fit without modification; check your current pickup shaft length if you're unsure.
Do I need to solder this pickup?
No. EMG's solderless installation system uses a two-wire plus battery connector and includes the output socket and battery clip. You'll need to install the supplied potentiometers and mount the pickup, but no soldering iron required.
How long does the 9V battery last?
The battery is rated for 3000 hours of use with an 80 µA current draw at idle, which translates to roughly 125 days of continuous playing before replacement.
Is the EMG 81 good for blues or jazz?
The EMG 81 is tuned for aggressive, articulate midrange and is optimized for metal, hard rock, and progressive styles. Blues and jazz players typically prefer warmer, less aggressive pickups with softer note separation.
What's included in the box?
The pickup ships with volume and tone potentiometers, output socket, battery clip set, mounting screws, springs, and all hardware needed for installation. You will need to provide your own 9V battery and any cables or wiring harness specific to your guitar.
Do I pay sales tax on this order?
Sales tax is collected only on orders shipped to California; orders shipped to any other US state are not charged sales tax at checkout when you buy direct from our website. Marketplaces collect sales tax as the facilitator in most states, so the same listed price can cost more there. Buyers remain responsible for any use tax their state applies. Free US shipping and 30-day returns are included.
Compare With
Artists Who Play This
✨ For You
Based on what you've been looking at.