EMG 66-7 Active Soapbar Pickup in Black
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4902
Description
EMG 66-7 Active Soapbar Pickup in Black
The EMG 66-7 is a seven-string active pickup engineered to capture clarity and articulation across the extended-range spectrum. Its compact soapbar form factor and solderless installation enable quick integration into your setup, while the active circuit maintains consistent output and a minimal noise floor—critical for tracking clean takes and maintaining precision in dense, layered mixes.
Tone & Recording Character
Built with an Alnico magnet and ceramic pole pieces, this pickup produces a focused midrange character optimized for the seven-string format. The 1.61 KHz resonant frequency positions the peak response in the articulate upper-midrange, delivering the cut and note definition needed to maintain clarity on lower tunings during tracking and mixing sessions.
Reliability & Studio Performance
The active circuit runs on a single 9V battery with an impressive 1500-hour battery life at typical usage levels, and draws only 160 microamps when powered. Output measures 3.00V on a single string and 4.50V when strummed, with a low -100 dB noise floor at 60 Hz and 10 Kohm output impedance for transparent signal delivery to your interface and DAW.
Key Features
- Seven-string extended series design (3.5 x 1.5 inch cap)
- Active circuitry powered by 9V battery
- Alnico magnet with ceramic pole pieces
- 1.61 KHz resonant frequency for focused midrange response
- 3.00V output voltage (single string)
- 4.50V output voltage (full strum)
- -100 dB noise floor at 60 Hz
- 10 Kohm output impedance
- 160 microamps current draw at 9V
- 1500-hour battery life per set
- Solderless installation system
- Includes split shaft volume/tone control set, output jack, battery clip set, screws, and springs
This pickup delivers the noise rejection and output consistency active electronics are known for, packaged in a format purpose-built for extended-range instruments.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 66-7 is a seven-string active pickup built for recording extended-range metal and progressive material with focused midrange and articulate upper-mids that sit clearly in dense mixes. Its low noise floor and high output voltage deliver clean, transparent tracking through preamps and interfaces, while the predictable tone character makes it easy to dial in punch and definition across multiple takes. Studio players tracking heavy tunings will appreciate the consistent response and minimal hum, even on longer cable runs in the tracking space.
Who This Is For
Great for
- ✓ Metal
- ✓ Djent
- ✓ Progressive
- ✓ Extended Range
- ✓ Drop Tunings
Not the best pick for
- – Jazz
- – Blues
- – Folk
Skill level: Intermediate · Advanced · Professional
Frequently Asked Questions
What makes this pickup different from the EMG 81-7?
The EMG 66-7 is optimized for the seven-string format with a focused midrange and articulate upper-mids at 1.61 KHz, making it ideal for extended-range and drop-tuned instruments. The 81-7 is tuned differently for other applications; the 66-7 delivers tighter lows and clearer note separation on lower strings.
How long does the 9V battery last?
The battery provides approximately 1500 hours of typical usage on a single 9V cell, and the pickup draws only 160 microamps, so battery changes are infrequent even with regular gigging.
Is this pickup suitable for jazz or blues?
No. The EMG 66-7 is engineered for metal, djent, progressive, and extended-range styles; its focused midrange and high output character is not voiced for jazz or blues tones.
What comes in the box and how difficult is installation?
The pickup includes a split shaft volume/tone control set, output jack, battery clip set, screws, and springs. The solderless installation system makes it a straightforward swap for most extended-range configurations, though basic guitar electronics familiarity is recommended.
What is the noise floor, and will it hum on long cable runs?
The noise floor measures -100 dB at 60 Hz with 10 Kohm output impedance, which means minimal hum and transparent signal delivery regardless of cable length or stage conditions—a key advantage of the active circuit.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.