EMG 60X Long Shaft Active Humbucker Pickup in Black Chrome
Share
- Brand new in original box
- Full EMG manufacturer's warranty
- Free shipping in the continental US
In stock
- SKU
- EMG4860
Description
EMG 60X Active Humbucker Pickup
The EMG 60-X is a modern active humbucker engineered to capture articulate, controlled output with a silent noise floor ideal for tracking and overdubbing. This ceramic-magnet design delivers tight low-end and crisp articulation across a broad tonal palette, translating clearly to mix bus in both high-gain sessions and cleaner recording contexts. The integrated preamp architecture and solderless connectivity system streamline installation and tone-shaping during studio setup.
Electrical Performance
Output measures 3.00 V on single notes and 8.00 V on full strums, with a resonant frequency of 2.28 kHz that emphasizes midrange clarity for definition in dense mixes. The -107 dBV noise floor at 60Hz ensures silent recording under high gain without hum or interference, while 2.00 kOhm output impedance maintains signal integrity into preamps, interfaces, and console channels. Battery consumption of 80 microamps at 9V yields approximately 3,000 hours of session time per charge, and the design supports up to 27 V DC for dual-battery configurations in extended recording rigs.
Design & Components
Close-aperture coils and ceramic magnets work with a newly designed preamp stage to suppress noise and enhance pick attack definition for precise tracking. The package includes solderless Quik-Connect wiring, a split-shaft volume/active tone control set, output jack, battery clip, mounting screws, and springs—everything needed for rapid studio installation without soldering.
Key Features
- Ceramic magnet construction
- Resonant frequency: 2.28 kHz
- String output voltage: 3.00 V
- Strum output voltage: 8.00 V
- Output noise floor: -107 dBV @ 60Hz
- Output impedance: 2.00 kOhm
- Current draw: 80 microamps @ 9V
- Battery life: 3,000 hours
- Maximum supply voltage: 27 V DC
- Solderless Quik-Connect system
- Split-shaft volume and active tone control
- Close-aperture coils with newly designed preamp
The EMG 60-X combines low noise, predictable output, and hands-free installation into a versatile active humbucker suited for producers and engineers tracking across multiple genres and mix contexts.
More Information
| Condition | New |
|---|
Reviews
At a Glance
The EMG 60X is a noise-free, articulate active humbucker engineered to cut through a mix with clarity and punch in the studio. Its tight low end and midrange emphasis sit well in dense arrangements, while the low noise floor and predictable output (8V on full strums) make it easy to track and blend with other instruments. Solderless connectivity and onboard active tone shaping let you experiment with tone quickly during overdubs and layering sessions.
Who This Is For
Great for
- ✓ Metal
- ✓ Hard Rock
- ✓ Progressive
- ✓ Studio Sessions
- ✓ High-Gain Applications
Not the best pick for
- – Traditional Jazz
- – Acoustic Folk
Skill level: Beginner · Intermediate · Advanced · Professional
Frequently Asked Questions
What makes the 60X different from the EMG 81/85?
The 60X emphasizes midrange clarity and articulation with a resonant frequency of 2.28 kHz, making it more versatile across clean and high-gain tones. The 81/85 models are higher-output designs focused on maximum aggression. The 60X's tighter low end and controlled dynamics suit both metal and studio precision work.
Do I need to solder to install this pickup?
No. The EMG 60X uses Quik-Connect solderless wiring, so installation requires no soldering. The package includes all hardware: split-shaft volume and active tone controls, output jack, battery clip, mounting screws, and springs.
How long does the battery last?
At 80 microamps draw on a 9V battery, you get approximately 3,000 hours of playing time—roughly a year of regular use. The pickup also supports up to 27V DC for extended battery life on dual-battery rigs.
Will this pickup work in a noisy live or studio environment?
Yes. The noise floor is -107 dBV at 60Hz, which means silent operation even under extreme gain settings. Close-aperture coils and the active preamp design suppress hum and interference effectively.
What output levels should I expect?
Single-note output is 3.00V, and full-strum output is 8.00V. Output impedance is 2.00 kOhm, so the signal maintains integrity into any preamp or audio interface without coloration.
Do I pay sales tax on this order?
We collect sales tax only on orders shipped to California. Orders shipped to any other US state are charged $0 sales tax at checkout when you buy direct from our website. Marketplaces such as eBay, Reverb and Amazon collect sales tax in nearly every state as marketplace facilitators no matter who the seller is, so the same item at the same price costs less bought direct. Free US shipping and 30-day returns are included. Some states ask buyers to self-report use tax on out-of-state purchases.
Compare With
Similar Gear
Complete the Rig
Gear that pairs well with this.
✨ For You
Based on what you've been looking at.